to pull air into the case and improve the airflow around the hard drive and the the northbridge chip. - keep the door for the removable disk drives open to allow some air to be pulled into the case from the front and cool the internally mounted hard drive...

which did lard all ) .. in fact the suspect temp is now at 68 c .. it`s a warmer day , , my hard drive temps are ok ( hotest at 36c) and the gpu while a bit warm is ok as well ... I note that the core temp and the gpu temp are close to each other .. I wonder...

your chipset, CPU, PSU, and Hard drive temps. Though you have to have sensors on each for them to work right. My Power supply doesn't and the temp always shows 114C! Got this from a while ago. FYI when they mention CASE temp., it is the case cover of the...

post pics tonight, I hope I have the front hard drive bays in and painted. Hey everyone, I got the hard drive bays done today, there is six of them, three on each side to house my two dvd drives, one all in one and floppy drive, and the new fan controller...

three hard drives in my gaming system never reach 30 C. So better cooling is easily attainable. Hard drive temps of 50 C can prematurely kill hard drives. sounds like a simple air flow problem within the case IMO assuming you have one intake and one exhaust...

the fan speed with(i suggest Core0 on INTEL CORE) -Give it a desired temp(The temp at witch you want the fan to speed up at) -Get the warning temp to 75(or wherever you want to be warned) -If you want it in the system tray - check it(You can only have one temp...

HEAT..... To the point: System: Dell 4700 3.0 GHZ P4 2.5gb DDR2 Ram Geforce 6600gt 512mb Video(Forsha) 80gb WD Hard drive (internal) 160gb Seagate Hard Drive (internal) Power exhaust fan Intake 92mm fan blowing across CPU heat sink Thermaltake...

also the Vantec fan pci at 4000RPMs (Note) make sure you have more than 550Watts or higher for muilt-Fans) Now my CPU temp is at 28C to 31C, System Temp is 27C to 29C, hard drive temp is 30C to 33C This is without any water cooling system install. Also...

SATA driving running in IDE mode? What's that?. I just got done building a computer. It is the first computer I ever built with SATA hard drives and a SATA DVD drive. Everytime I booted the computer my Gigabyte MOBO would post a message SATA driving...

all copper base is alot better than the copper insert in the 7. also which motherboard do u have in your system. is it reading temps from the XP diode, or the socket temp? Yes, I have a feeling the temps he reports are from the socket as well. Perhaps 34ºC...