New Hardware/Software installation problems. Archived from groups: microsoft.public.windowsxp.basics () While trying to install a new printer (software), I get a error message advising me that another installation is already in progress. (which there isn't)...

you should use a computer firewall.. You should, in some way, use a firewall. Hardware (like a nice Cable Modem/DSL router) or software is up to you. Many use both of these. The simplest one to use is the hardware one, as most people don't do anything...

I powered down, removed the hardware and rebooted. So the system now has no WiFi hardware or software. After a while I re-installed the Belkin software (no hardware present, as the Belkin manual say) I powered down, installed the hardware and powered...

I prefer AntiVir. I had made a data DVD with all hardware drivers as well as back-ups of all software that I use so I can reinstall everything from one single disc - hardware and all software. Didn't think it would come in handy so soon! After I do...

has not helped. Does anyone know of any possible hardware or software conflicts with this printer?. I have recently purchased a Lexmark x4550 wireless all in one printer. However, the software will not install correctly. When install program reaches the...

MyUninstaller' > I can see I have 511 installed programs! >> In addition there are those programs which didn't need any >installation. I reckon I have about 100 of these ready and > waiting to be used from a shortcut link on my menus. >> And then...

other software, because I reasoned that it might possibly interfere with Windows. However, still no problem. Then I installed all other software, after each installation rebooting and testing (took me all day!) Still no problem. Then I installed a UFDS utility...

any existing Windows installation, it would be prudent to run the Upgrade Advisor for Windows XP. This tool will report what hardware or software may be incompatible with Windows XP. If you follow the Upgrade Advisor's recommendations, you should not have...

was OK. The > only way I was able to make SP2 work was to unlcik the "Shell >Hardware Protection" serivce. COuld that be part of my problems now > using some hardware and trying to install the printer? Download and install the FULL Service Pack 2 file.....

be greatly appreciated. I ran McAfee virusscan and no problems were found. I also installed and ran Spybot S&D and Adaware, but no problems were found. Any advice would be GREATLY APPRECIATED! Bryan. Archived from groups: microsoft.public.windowsxp.security_admin...