My X4 940 GA-m57sli-s4 interesting issues fixed. 1st issue the 940 wouldn't post what i found if i locked the heat sink 100% this was causing the issues both on stock and aftermarket cooler once i backed off to 1\2 way boots fine and temps at idle w \freezer...

Issues not fixed. Archived from groups: microsoft.public.windowsxp.basics () There are some problems in windows that are listed in KB that sometimes gives a work around and under the Status title this text: Microsoft has confirmed that this is a problem...

AntiSpyware (Beta1) If none of the above fixes the issue then run Hijackthis again, save a copy of the log file and cut and paste it back here to this group so that I can analyze it.Ignore anyone who tells you to post it elsewhere. I need to see it...

some have complied and then found the same issues after their cameras/lenses were shipped back. It's an endemic problem, Canon! It's not my intention to bash the 20D or Canon ... damned good camera and a good company. I think they will eventually fix...

I believe that the problems described in KB313896 is still an issue. KB313896 states that this issue has been fixed in Windows XP service pack 1, but it was either never fixed or has come back again. Basically it is a problem where a wireless network card...

issue, I started out w/ the following. Underclock both GPU and Memory to 700 and 900 respectively. Tried a simple resize in PS CS4 and no more flicker! So I incremented the GPU clock to 780 and then 800 in ATI Overdrive, and no issues in either. Then, I incremented...

drivers that came on the disc with the card, and the problem is somewhat fixed (probably due to the fact that it doesn't have ATI OverDrive on it). However I don't consider this a fix since 8.1 gives me numerous issues with other games. And before you ask,...

that the internet security was bumped really high... so i tried lowering them. that fixed a lot of browsing issues that i had after the fix. problem now is that my GTalk wont log in. it actually says "connecting" on the status bar, then an error pops up...

at 1066MHz RAM timing. I would suggest to write to the RAM and Mainboard manufacturers to dig out the exact issue and fix. That would be better for you. Thanks for the info i might have fixed i upgraded my bios, i have my ram set to 1600MHZ AND THE VOLTAGE...