Amd cpu heatsink help. the heatsink i recieved isn't the same as the manual shows... i have tried to install it and when i try to click it into place it feels like there is too much pressure and its going to break. could anyone help me with this?. the heatsink...

Problems installing Zalman 7000a heatsink, help!. <b><i>Edited**</i></b> Sorry, I figured out the first problem about not being able to screw the heatsink in, I have it screwed in, but now another problem. The instructions say screw the bolts in until they...

xps 410 heatsink help!!!!! plz. hey how is the heatsink attached to this computer???? because i cant find how to take it out... can you guys help me please??? i will appreciate it :D . hey how is the heatsink attached to this computer???? because i cant find...

Heatsink help ???. I'am defecting from AMD/VIA and going for P 4 2.2mhz ***512kb*** 478 Fic VC15 mobo 3 x 256mb Micron DDR ATI AIW radeon My Q With AMD's I have alway's Used Hedghog's 238 & Wing's all copper with delta's... sq or round fins do not...

difference. thanks for the helps~ im sorry to not being so clear... this is what im thinking to do thx :D You're gonna have to lose that shroud. why? i'm just thinking if those heatsink will help the card to...

it? You may want to make sure the heatsink is seated properly... it can be very difficult at times to put enough pressure on the heatsink to get those clips tight, and those clips should be pretty damn tight. In the past when I've changed heatsinks or helped...

As to the pits on the core. That's not imperfections.. they're all like that. And yes they do hinder heat transfer. Sanding the heatsink will help as it too is not perfectly smooth on a microscopic level. Using thermal paste will help as well. There is a...

got zip ties, I just need a 40mm fan. I have absolutely no idea where the zip ties have to pass through the fan nor the heatsink. Any help on how it's done, advice, photo's, links etc is appreciated. ...

and fiddling it on VRM - thermal pad - AS5 - heatsink, would that help? Otherwise I'm out of ideas apart from making tunnel from one of front fans right to the heatsink's fins. I have Lian-Li Armorsuit PC80, it's pretty big and full of fans (3x 120mm intake...