- Content type
- Forum (337)
- Picture Stories (1)
- Related Search
- grit sandpaper
- Thermalright
- Xigmatek
- By relevance
- By date |
- Sort :
-
CPU and Heatsink Lapping Guides
- Forum
CPU and Heatsink Lapping Guides. [0061ff] (For Thermalright Ultra 120 Extreme Lapping, see further down) Well, after lapping my HS, I've had this nagging little voice in my head telling me to do the same from the...
-
Heatsink Lapping
- Forum
Heatsink Lapping. I know I have fairly inactive here lately, not that I assume many of you guys noticed me here anyway, but I was wondering if anyone here had tried "lapping" their heatsink before? I stumbled on a review on a lapping kit at SystemCooling.com...
-
First time Tuniq Tower 120 User
- Forum
warranty. The TT120 is intimidating because of its size but once you remove the fan carriage, its a lot easier to lapp than some of the other heatsinks I've lapped. There is a lapping guide stickied at the top of this section. ^Agreed. The TT120 and the TRUE120...
-
I7 Running Too Hot Noctua NH-U12P Cooler
- Forum
it safe to lap the CPU chip in place? I haven't the foggiest. Don't want a metal chips down in the MoBo. I'm using 400 and 800 grit. Read through the Lapping Guide Sticky... ...
-
DaClan Review: Thermal Interface Shootout
- Forum
grain of rice of Ceramique and it covers the whole surface easily. There are still minor imperfections that can't easily be seen that the TIM fills up. There is a point when lapping that you have both the heatsink base and the IHS so smooth that using normal...
-
To THG, Do your own Thermal Paste Review
- Forum
heatsinks; an enthusiast one and a stock one. This will allow mild overclockers to see the advantage of decent thermal paste, even with the stock heatsink. And please, use both an Intel and an AMD :) You could also include a guide of heatsink lapping...
-
owners of q6600 @ 3.2+Ghz on air - What are your specs?
- Forum
Core = 72c Cooler: ZeroTherm BTF90 Prime95 Small FFT's stable @ 12 hours. Intel Q6600 B3 @ 3.2GHz Noctua NH-U9F heatsink 1000rpm fan. GA-965P-DS3 Rev. 3.3, Noctua NC-U6 Northbridge Heatsink. Room temp : 25°C Northbridge temp : idle: 35°C, Load: 40°C...
-
Notebook-overheat maybe redoing heatsink and thermal paste
- Forum
Notebook-overheat maybe redoing heatsink and thermal paste. Have a friend with a laptop that could be experiencing heat problems. It's a Tiny G900 laptop and every now and again (twice in past week) it turns off, not a nice shuts itself down but a straight...
-
Best thermal paste?
- Forum
expect great innovations from this company (and any company ready to adopt a new tech. ;) ). [00b6ff] EDIT: By the way what is "Lap" . Here is a Guide for Lapping excerpt below. More at [b][i][#00b6ff] Thanks again.[/#00b6ff][/i][/b...
-
P4 with hyperthreading
- Forum
heatsink. Purchased 2weeks ago. Let the temp and (more important) system stability be your guide-if it works good-great, if not look for better cooling solutions. You got the stock 2.8C heatsink? WHAT! News to me! I'm running a stock 3.2 heatsink lapped...
