help. I've installed my modem (on 2 different ports), installed the software(windows chose drivers) set everything up(dial up net. and my isp conection) when I try to log on I get no dial tone(tried hooking a phone to the line after the modem and picked up...

so I try to go online - no way. In Device Manager the modem says "cannot start". I delete and re-install the modem, but no help. I've never had to install any drivers for the thing before and have no idea what modem it is (it could be any of three or...

modem, and the same problem is >> occuring with that. As the USB modem and dial up are having the same >> problems, I think this may have more to do with XP, although I have no idea >> what... >> USB modem? Don't know if this will help but you...

Can any one provide the drivers for Rockwell HCF 56K Speakerphone Modem. Thanks in anticipation. "All delays are dangerous in war." Possible help: Modem Chipsets: Conexant (formerly Rockwell) Modem Drivers 56K Data Page Hey, xyz ... you forgot...

6100 Modem Dial up Help. Archived from groups: alt.cellular.nokia () Have a Nokia 6100 using the Infrared Port with Windows 2000 to dial up an ISP. When I try to connect, the number appears on the phone display but I then receive the 'number unobtainable'...

dial. I have tried Hyperteeminal, and created a new connection, both get the dial tone but that is were it stays. It won't dial a number. Thanks for the help. I'm running windows XP and installed a new modem, I get a clear dial tone but the modem won't dial....

error. The funny part-- after trying to get online, all the phones go dead, no tone. reboot PC- unplug jack to modem to get dial tone back to phone. any ideas besides a new modem? appreciate any help peace be with you. A dial up modem- Ok in device...

XP, with a 56K Conextant modem and Earthlink ISP. When I try to dial in to Earthlink, the graphic shows "Dialing in.." and I can hear the modem dialing, and it sounds like it's trying to connect. After about 30 seconds it gets quiet, another minute or so...

modem worked for a week afterwards. After that week, I would be able to hear the dial tone through the modem's speaker and I would hear the modem dial, but I would still hear a dial tone. It was as if the number had not been dialed at all. If I waited...

connected to and only the computer with that mac address can dial the modem. So what I did was give the computer the routers MAC address and configure the modem. Next connect the modem to the router so the router could trigger the modem to dial and reset...