preamp for adcom 535 II. Archived from groups: rec.audio.pro () On the advice of some RAP'ers i'm getting an adcom 535II for my LS3/5A's to use as studio monitors. After doing some research it looks like I'm going to need a preamp as well, is this correct?...

placed infront of a standard tuba amp. Thanks for any help in advance, it will be most appreciated. Jon. Archived from groups: rec.audio.pro () Shure probably makes a nice little 4 input preamp mixer. Bob "Mmm_moo_cows" wrote in message news:...

preamp/preamp-processor/receiver perform the switching function? That is, the DAC output goes to one set of audio inputs on the preamp, and the DVD player would have its output (digital or analog) go to another set of inputs on the preamp-processor (which...

hurting anything, but it definitely isn't doing any good with battery-powered microphones, and you never know... 4. See if your preamp has any kind of switch for the inputs, like "Line/Mic" or something (the make and model of the preamp would be really...

hear a loud click/pop every once in a while. This noise is definitely not in the source material being played. It have unplugged all inputs to the preamp, leaving only its connection to the power amp, amp to speakers. The background hash and crackling is...

will likely need, at minimum, an external mic preamp that feeds line-level into your Sound Blaster. Many people who are looking for a bit better quality use external mic preamp/USB interface products like the M-Audio Mobil Pre USB ( "Holden" wrote ... >> THe...

Tape Out Y-cable into the input of the preamp, plug the output of the preamp into the In of the H-120 recorder, and then, using the external recording level meter as a guide, mess with the gain settings and level control of the preamp to get a good reading...

SB Live vs US-122 vs 1010LT. Archived from groups: rec.audio.pro () I'm using a neumann TLM-103 mic. The output is hot enough to slightly overpower the input preamp of a TEAC 1A mixer (with onboard pads on) feeding my SoundBlaster Live card. Don't know...

have convinced me mike rivers) and I'm having a little trouble understanding all the different inputs.. from what I can tell there are XLR inputs with preamps, line level inputs, balanced inputs, unbalanced inputs, and direct inputs.. maybe some of...

FWIW - going from a nice preamp and just using unbalanced cables to > plug it into a standard pc card will sound like poo-poo. Kinda defeats > the purpose of hvaing a nice preamp to begin with. Get an upgraded > interface with XLR inputs (assuming you're...