issue since everything has been updated and replaced ( minus the CPU and Motherboard ). When I went from XP to 7 I did a fresh format, so everything is a fresh install. I have underclocked my GPU from factory OC, no joy. I have also made sure my HDD has been...

bring on the gimps errrr noobs!! Yer i had a XFX factory overclocked one. Came artifacting outa the box the first day i installed it! I underclocked it a smige and was ok so fit zalman vf900 and ran at defult. Few months later the screen started tearing...

Corsair C4DHX only stable when underclocked. Hi, I've recently installed 4GB of Corsair C4DHX (2x2GB) RAM onto my Gigabyte EP45-DS4P motherboard (only RAM installed). However, the system will only run stable if I underclock the RAM to 333Mhz (667 effective)....

amdagp.sys (or something close to that). Even booting from the XP CD and trying to "repair" the windows installation just causes the system to hang. Ideas? 1.4 Ghz AMD T-Bird underclocked to 1 Ghz...just to be safe! underclock the CPU...the mobo could...

I have computer that locks up all the time. I have underclocked it to 1000MHz and 1.65 volts. It is a 1.33GHz T-bird. I think the problem is a heat issue. My system temp is about 30°C and my CPU temp is about 51°C idle when underclocked. I installed Win2K...

from cd-rom and Hard drive, if it did finish the windows setup would come up with errors and FUBAR the OS. Tried WinME, Win981st, Win98SE all the same. Underclocked the thing to 1.05 and install of Win98SE went fine. Anyone have any ideas to get this thing...

home premium. I've been using the most recent Catalyst drivers since I've installed Windows (9.10), and yes, they are installed correctly (and have been reinstalled correctly a few times, yes that means getting rid of the previous drivers). Earlier today...

ppl said, make a clean and fresh install to windows and when u install graphic card driver, avoid chossing your driver manually, just put the cd and follow the instructions (some people go to device manager and install the driver from there, this could be workable...

keep good stuff unavailable and make us hate it even more, somehow guru3d got a hold of the 160.03 leaked beta drivers and modded them SPECIFICALLY to fix most BSODS, by changing the way it reads and writes to system memory, install these and be happy ever...

of these systems have the FSB and CPU multipliers locked to the auto-detected defaults. And I honestly can't say I've ever seen OC results for an E2200 Allendale... Not that I've ever looked for them, either :) Hey Raz, i just got it and i installed the hd4650...