passed phase 1 but choked on phase 2 with some PAYLOAD error reported by Linksys. Connecting to Linksys using Windows IPSEC worked, however. Any ideas? Archived from groups: comp.dcom.vpn () Linksys IPSEC routers will connect with Zywalls. I did it once....

IPSec over wireless to router. Archived from groups: comp.security.firewalls () Is it possible to set up two Win XP machines to use IPSec over the wireless connection to the router? The router and pcs are setup to use WEP plus locked down MAC addresses....

or alerted with IPsec supplementing BI. I was using BI and IPsec to supplement the no FW Linksys NAT router I was using. But until now, I was not aware of how powerful of a solution IPsec is and its ability to be used in a FW like manner to stop inbound...

IPSec VPN between two different routers. Archived from groups: comp.dcom.vpn () I'm wondering if SMC VPN router can communicate with Linksys VPN router using IPSec. Has anyone tried?. Archived from groups: comp.dcom.vpn () I'm wondering if SMC VPN router...

microsoft.public.win2000.security () You can create an ipsec policy and specify that traffic only be encrypted for particular ports such as 137 UDP, 138 UDP, 139 TCP, and 445 TCP for file and print sharing. As far as firewalls and routers, ipsec traffic...

to one of the wireless router's ethernet ports. -- Ross "Jason" wrote in message news:d5d88e7c.0406241408.60e7d156@posting.google.com... > I had a question: >>> I have a cable modem going into a wireless router with a printer port > and 4 ethernet...

knows does MN- > 820 or MN-700 can support multiple use of IPSec/VPN? > Since me and my wife needed to use VPN for work. Archived from groups: microsoft.public.broadbandnet.hardware () Do not do it! Run! The MS routers do not allow IPSEC throught he...

IPSec passthrough sessions? So far I have seen Linksys & Netgear with DDNS client, and SMC don't support. While SMC supports upto 8 IPSec passthrough, and the Linksys supports only 1.. Any one know if there are routers with both DDNS client as well...

2003 server (not the router), blocking some connections I have not set up IPSec/L2TP tunnels before. You should rely on what logs say, in *both* server log (IPSec log, L2TP log, PPP log) and client logs. Then google on specific log errors. Can you also post...

Security 2004 installed. However, disabling the personal firewall component doesn't seem to make any difference. Oh, and the PPTP and IPSec pass-through boxes have been checked on the router. -- Mark Bertenshaw LEAX Controls Ltd. Archived from...