HL2] Getting a joystick to work. Archived from groups: alt.games.half-life () Okay, so I finally bought a left-handed joystick so I can play with a joystick and mouse (joystick for movement, mouse for aiming). I successfully bound all of the buttons on...

tell me where I can find a driver that will work so we can use this joystick?. Archived from groups: microsoft.public.games () I have a Sidewinder Precision Pro Joystick and it worked fine when I had Windows ME on my computer. I have updated to XP and...

Steve Sullivan" wrote: > More than likely, it won't work. The 3D Pro joystick was physically > designed as a gameport only device. Simply getting an adapter won't work> because the joystick is only designed to work with a gameport.. >> Steve >>> Archived...

an older MS > Sidewinder Force Feedback PRO joystick with DB-15 connector that I use to use > on an older machine with Win98, worked perfect. I now have a new machine > with WinXP, will this joystick work with this OS? I have read several posts > here...

when you use the yoke. Final result: you have two FS9 setups. One for joystick work (fs9joystick), one for yoke work (fs9). The same technique can be applied for other things as well (e.g., I have a separate setup for MegaSceneries). ...

installed. What would be a good USB joystick which would work with the games and with WINXP and is still supported? (Have heard that many joysticks don't work with XP and are not supported). Thanks for the info/advice! John Archived from groups:...

again--nothing. Not even when I plug it into the USB port does it light up. I spent many many dollars on the joystick and it worked great... for a while. So my question is, does anybody know of how I can go about getting my joystick fixed? I tried...

josystick and works fine, but WinXP Home + the same USB joystick does not work. In fact, as I posted before: MS WinXP + MS Sidewinder USB joystick + MS Fury3 = MS does not work ! ...

to get this joystick to work? Thanks in advance. Archived from groups: alt.sys.pc-clone.dell () you will need the usb drivers for the joystick, install them then plug the joystick in. does the 8300 have a standard joystick port. "Okie" wrote in message...

PC joysticks work differently and have a square surround and can reach the edge of your calibration box. There is nothing wrong with the controller though, nor the calibration tool :wink: If that's the case, the controller will never work the way it should....