The IDE cables handle the pass thru audio and there is NO NEED for internal cables. Hope this helped. PS I was worried about the onboard disabling and all, but it has been alot easier than expected. the white plug top left in this pic ( there should be...

know how they did this, here is a pic of driverheaven's setup of the radeons(left pic): (right pic)...

R.I.P. Nikon. Archived from groups: rec.photo.digital.slr-systems () -- Rich ;-P. Archived from groups: rec.photo.digital.slr-systems () "Stacey" wrote in message news:3nd0olFto1oU1@individual.net... > Skip...

case, take out the piece of metal in the back so the card can fit, plug in motherboard do i need any tools! What that means is that you may need a low profile card depending on the case. Is it the one on the left in this pic or one of the other ones? probably...

not sure... oem and retail cards are the same except for support and included software. Okay, i did some more research, and your right the plug lives on both OEM and retail parts. bobby, the white plug top left in this pic ( is where you need to stick...

back rear end of the card with a pencil, heavier shading = more voltage If you look at the bottom left of that pic you see four little square silver pads of solder, the 3rd one from the left is your measuring...

X-fi and 7900GS are good deals, but the X1300 and 6600 are lousy 512MB options. Best to stay to the right and ignore the left (of the pic). ;) They are the GF-XT's of manufacturers. :P OK, XT on nVidia...

as if your gonna take a pic) left button (options) go to settings, select HIGH Q. the pic's on the 6600 are better than the 3650 or 7650. I did a test with my mates some time ago where we held all 3 phones together and took a pic of the same thing. There...

albums/ii230/medjohnson77/002-2.jpg Looks good, I've always wondering if I could make my on BTX compatibe case lol. Post more pics! Looks good, all I can say is that you must have a lot of time...

left black screws for last. Remove those last two and the board slides down a bit and pulls out. I actualy left the wiring and all intack. The panel has a square hole to the bottom left that a bunch of the cables go through. I simply pull the panel out...