no problems. One thing I noticed from supporting home based users though is to check functionality of your router if you work from a remote office. Some of my remote people got these cheap D link routers and cannot route VPN traffic. I googled the issues...

me in > the right direction regarding setting up the router to allow traffic > from the camera so that I can see it from the PC? I suspect I need to > open a port but the manual gives no help with this. TIA. Mark, Have a look at (link to your router...

This cable services a Buffalo media centre (as the wireless didn't deliver). However I now have an Xbox 360 and want to link that to the router as well using the same cable. Is it as simple as adding a hub/switch (apologies I'm not clear on the right terminology...

would see if I could get the wireless link between the PC and the router to work. I have not had much luck. Should it be possible for me to see the router through the wireless link the way I can through an ethernet cable? So far, all I get is a NIC icon...

as the Sharp network laser printer. All of this works without a problem right now. Whenever we've needed to use one of the hard links to the router, we've had no problems. For example, when the Sharp printer was bought a few months back, I simply used...

the same problems with a wireless connection? Connection with the router but not with the internet. Frank. Archived from groups: alt.internet.wireless () I am using a Belkin Gateway Router and a Belkin USB adapter on my Desktop (XP Home) for six months...

adsl wireless router which is very good - however I'm having problems! My PC has a wireless link to the router and another pc is linked directly via cable into port 1. Is there any way to close off and open that port via the router? I would like to...

I sent that one back > too. So D-Link sends me another and lo-and-behold, I have the same >problem ! If I recall rightly, the first router found the dsl > connection (the light on the router lit up) and then it was up to me > the configure the connection...

but enter the IP address for your router in your internet browser. ( if you know it) If not, You will have to call the model maker of the router so they can provide the IP address to the link to your router or router's manufactures website Sample :Open...