it into the port labeled "WAN" on your router (Linksys). 3) Connect network cable from another port on your router (Linksys) to your network card of your computer. 4) Shutdown your PC. 5) Unplug your cable modem/dsl modem and your router (Linksys) from...

How to manage a domain PC behind a (linksys) router?. hi there - i have a user on our network domain who has his PC connected to a small linksys hub/router (etherfast 10/100), rather than the network port that is wired to his cubicle. so obviously, the problem...

link speed on both sides. E.g. With: 1 GbE switch connected to router / switch built-in on router 100 Mb/s WAN port on router 54g wireless on router 3 Mb/s cable/ADSL internet 1000 Mb/s LAN port on computer A 1000 Mb/s LAN port on computer...

router, I have a Linksys Network Optimizer (OGV200). Plugged into one of the ports on the router is a Linksys Phone Adapter for VoIP (PAP2) to allow me to use Vonage. The router is a 4-Port Linksys (BEFSR41). However, I was experiencing these problems...

to only allow traffic on the Windows networking ports from the router's assigned IP(s). And ZA helps to protect the wireless machines from being attacked. For the wireless router, a best practice is to only allow the router to issue DHCP IP(s) for the...

network port but remember theres nothing under network! its blank!) blah but what a pain in the butt to go through and set the allowances for EACH folder ;/ To Be or Not to be... DAMN but that is confusing! I have a Linksys BEFSR41 Router and a Linksys...

broadband, then just get a router with a WAN port. The router will supply a manual to get you started, Netgear and Linksys are popular makes. 2. Wireless option. Buy one wireless router (same thing for ADSL/cable as above applies) and then 5x wireless...

I will try to set port 5000 as remote access port to see if I can access my router by typing or not. If I can then port 5000 is not a problem but it's something to do with how I set my port forwarding on my router. My DLink router is pretty straight forward...

the IP address of the router. Especially when fiddling with wireless settings this is best done using an ethernet cable to link the computer to the router using the network socket on the computer and one of the network ports on the router. It sounds...

your best bet is probably to get a router with a built-in switch. Something like this would work: The bottom line is: you would plug the router in to your DSL modem, then plug your PCs into the network ports on the router. That way, your PCs will have...