another step I should take? "Gary Bevans" wrote in message news:gPmcc.165105$cx5.121349@fed1read04... > What linksys router do you have? >> I had to flash my router BIOS in order to use Zone Alarm. >>Linksys BEFSR41. >>> "Patrik" wrote...

How to setup two Linksys routers (G&N) to work side by side?. I'll try to keep this as simple as possible. Router 1: Linksys Speedbooster G (referred to as "G" from now on" Router 2: Linksys WRT150N Draft N (referred to as "N" from now on" 1. I live...

Can't get Linksys router to work with AT&T DSL. sorry to post such a lame question on here, but I'm really struggling setting up my router with my AT&T DSL. I found a similar post, but couldn't figure out how to do what they were saying. I'm kind of a computer...

2. plug in model to WAN port on router. 3. configured router to run in PPOE mode. No luck, I know the router is port is good because It works with Cable modem. Try changing the IP address of the router. Linksys defaults this to 192.128.0.1. I'd change...

work together. Seeing as the router is a v2, and Linksys has put out a v3 and a v3.2 model since, I'm willing to accept this as a possible plain-ol' incompatibility. But before I run out and buy a new router, I'd like some kind of confirmation. Dell...

luck Lake Mead wrote in message news:... > Does anyone know if Linksys VPN routers work with other brand routers? > I tried connecting to a linksys router using SMC and Netgear routers> with no luck. Both routers got passed phase 1 but choked on...

Linksys Router/4-Port Hub Internet Connection Prob. I have been trying to get my Linksys router working for some time, and I'm not sure what I'm doing wrong. It's an older Linksys router (2 or 3 years old, I'm not sure if that’s important or not). I can...

Yes, the Linksys WRT54G V5 Really Is a Lousy Router. User forums around the web have been abuzz with complaints about the non-Linux version of one of Linksys' most popular products. Tim Higgins tested it and the WRT54GL Linux-based version and found at least...

was that my Linksys router (BEFSR41) is directly linked to my Cable Broadband modem, and my Netgear wireless (MR814) router is linked up to the Linksys router. This configuration worked. I recently purchased a Netgear WGR614 802.11g wireless router for...

WAN port of your Linksys router. Then plug your computer in one of the LAN ports of the Linksys router with a wire. Now use IE to navigate to the router's administration page, after a reset the default IP address of the Linksys router should be 192.168.1.1....