dhcp. It works fine. Can connect my laptop and another persons PDA without a problem. But I do have to assign an IP address and the router address and the main DNS on the laptop and PDA. Is there a way to just assign all that to the Linksys Router (BEFW11S4)...

Netgear wireles router is realy slow compared to my linksys. This is an odd and I hope I can get some assistance here before I pull my hair completely out. I have two wireless routers ( 1) Main router - Netgear Rangemax WPN824, 2) Linksys WRT54GS) My...

to memorize MAC addresses. On an E-switch, each port is a collision domain. On a hub all ports are on the same collision domain. Therefore a E-switch can not be a hub and vice versa. This is not theory, it is a fact. As for the Linksys Routers they...

the linksys router). I only said cabling because to me I viewed you network as: Linksys router is your gateway(connects to the dsl/cable modem) and from there you have a PC connected to that Linksys router and also another switch on that router. Connected...

wireless device a LAN address and plug it into a spare port on your current Linksys router. I am not sure on this, but I think you could use your current router address as a gateway and use the same netmask and DNS servers in your new wireless device. Linksys...

on the network? Thanks, Ben Two part answer.... a) It's your college's IT Department's job to worry about that. I found this out the hard way when I had a doctor plug in a cheap linksys router, and started trying to give out my IP addresses via DHCP...

whereby your router assigns an IP address to a device that shows up on the network, like a parking space in a garage. If you have 1000 ethernet devices that connect from time to time to your router, then your router, which only has 253 IP addresses...

whereby your router assigns an IP address to a device that shows up on the network, like a parking space in a garage. If you have 1000 ethernet devices that connect from time to time to your router, then your router, which only has 253 IP addresses...

My linksys router is on the way. Ive never done anything wireless before. Ive not hooked anything up yet. Is there an easy explanation of how to get the router to work with the dsl. Or is it too complicated to explain? What hopefully works set router to...

default) External IP Address: 200.xxx.xx.xx Internal IP Address: 10.xx.xx.xxx Browser: MSIE 6.0; SV1 IE current cache: 54 MB IE max cache: 80 MB I put Xs in for some of the numbers above for security reasons. gives me that same IP address as the above...