this disassembling process I found (in the two tweeters) a dark brown liquid inside the circular groove in the magnet where the coil is supposed to stay. Is this liquid part of the tweeter mechanism (and the coil is dipped on it) or is just moisture accumulated...

disassembling process I found (in the two tweeters) a dark brown liquid inside the circular groove in the magnet where the coil is supposed to stay. Is this liquid part of the tweeter mechanism (and the coil is dipped on it) or is just moisture accumulated...

Jansen electrostatic tweeter questions?. Archived from groups: rec.audio.high-end () I've got an old pair of Jansen speakers with the electrostatic tweeters. They're four array radiator types.( four inch square or so with four to a box.) I'm thinking about...

because the voice coil gets fried by the too high output. I currently have a stereo pair of speakers whose tweeter on one side is down approximately 10 dB from the other tweeter, starting at rolloff and continuing up through 20 kHz. I have switched...

Woofer mounting question. Archived from groups: rec.audio.pro () This probably belongs in rec-audio-speaker-constructor-geek but it's a change of pace here so... I'm substituting a pair of ALTEC 421A woofs into a pair of KLIPSCH kp301 systems The kp301...

Creative sound cards: WHY!?!?!?!?. Question: Why would anybody purchace a CREATIVE product knowingly? Well, as is known by anybody who enjoys quality sound, CREATIVE's idea of a good time is to make poor quality sound, and sell it as high quality goods....

umm.. other possibilities?)... Thing is, howdya get inside these things? - the tweeter has 3 screws on front - OK, can get that out, but the bass unit seems to fit without evidence of any fittings- feeling inside the tweeter hole for bolts etc around...

than cone/tweeter loudspeakers >(assuming good build quality in both types). For the most part, the effective slew rate of a ribbon or electrostatic tweeter is very good because of the low mass of the moving part and the large amount of force that can...

bi-wired. Bass driver one connection and mid and tweeter on other connection. Running a Conrad Johnson tube 2 channel preamp. Now is it possible to use a say 60 watt tube amp and run that through one connection to the mids and tweeters giving the benefit...

subs, which had a good reputation, but can't find any info on the speakers. They're trapezoidal, very solid cabinets, with a small foam-surround woofer and what looks like an ADS tweeter (large black square plate, small convex plastic dome) from the early...