Load drivers during install without floppy. Archived from groups: microsoft.public.win2000.setup () I have a server here without a floppy drive. It is using a SCSI hard drive that Windows cannot detect during the install process. I do have the drivers,...

Windows Vista on Notebooks: Why and What Hardware?. Microsoft starts releasing Windows Vista on November 30th. Writing from a mobile computing perspective, Guy Thomas and Barry Gerber offer a number of good reasons to switch to Vista and help you make the right...

of the chipset. ICH9R Raid port, I had no problem pairing, but the disk drivers had problems. When installing windows, u have to press F6 then problem is they always say my floppy is not copied correctly. Well... i'm sure my floppy disk and drive has no problem...

NOT need to install drivers when installing VISTA. Prior to VISTA, Windows only knew how to handle IDE drives, so you had to install SATA drivers from floppy early in the Win XP Install process if you wanted to use the SATA disk as a native SATA device. The...

Max RAM installed. Two other IDE devices installed + floppy drive. Recently, I removed the old IDE HDD. I installed a new 500GB SATA HDD. I was able to get it formatted in order to install WinXP. During WinXP installation, I pressed F6 in order to...

later add a SATA unit, you can install SATA drivers in Windows and have the BIOS treat the SATA drive as a native SATA device. With the driver running Windows has no problem using it for data. BUT that only works because Windows loads first, then loads drivers,...

support so I'll need to load the drivers during install from a floppy. My problem is that the new motherboard does not have a floppy connector/controller so I have no idea how I am going to load these drivers. I could borrow a USB floppy drive from a friend...

run the > Win 3.1 install I get an error that says the CD-ROM cannot be detected. The > CD-ROM is ok because the Win 98 install worked fine. My guess is that the the > Win 3.1 CD's drivers are not new enough to run the CD-ROM. I had the idea of > going...

system. Whatt means native drivers? Er, this does work although Symantec do not have a clue. You can't load the drivers from diskette as with the XP CD . Both Ghost 9 and 10 will load one and only one additional driver at boot (they go through the motions...