Looking for analogue VoIP adapter with 4x FXS ports. Archived from groups: comp.dcom.voice-over-ip () Can anyone recommend an analogue VoIP adapter, like the Sipura 2100, but that will accommodate 4 analogue handset (FXS) connections and 1 of more ethernet...

posts kbytes subject 11 25.6 VoIP " 1899. com " 10 15.1 Looking for analogue VoIP adapter with 4x FXS ports 9 16.1 Cordless phone via ATA via RJ45 router with no provider 6 10.2 Open Source SIP "PBX"? 5 7.4 VOIP K Phone...

Sipura, well Asterisk is basically a software PBX that usually runs under Linux or some similar system. Sipura (www.sipura.com) is a manufacturer of hardware, such as the SPA-2000 ATA which allows you to connect ordinary analogue phones into a VoIP...

can you recommend any hardware? >> thanks a lot, > with friendly regards, How many phones..? Which VoIP service..? For one or two phones in a domestic or small business environment, take a look at I use the SPA-2000 unit which has two analogue ports...

just isn't there.) >>>>Does the "VoIP Phone" you speak of include the TA (telephone adapter or >>the ATA , analog telephone adapter) ? - RM >>> They are complete devices - basically, physical telephones with ethernet >ports. >>>> miguel...

so if anyone could provide a little information that would be great. I'd like to use my cordless phone to place voip calls so I know I need a ATA analogue telephone adapter. I'd like to plug the ATA into my Dlink router via an ethernet RJ45 port so...

leave me with a wired solution which will be seen as a step backwards as we have 1 fixed wire handset and dect cordless phones at the moment, are there any advantages however this would bring ? Next we get into the Analogue phone adapter/gateway/router...

Why is porting numbers such an issue?. Archived from groups: comp.dcom.voice-over-ip () Hi, I am considering signing up with a voip service but if I do so, I would like to port my current land line number. I have a friend who attempted to do this through...

to Windows as speakers + mic, but allow me to > plug in a spare analogue handset. Even better if I could dial from > it. The solution must work with Callserve. I'm not sure such a beast exists. To use a true ordinary analogue telephone with VoIP, you'd...

card for VoIP applications?. Archived from groups: comp.dcom.voice-over-ip () Does anyone know of a virtual modem that uses the sound card for VoIP applications? Archived from groups: comp.dcom.voice-over-ip () Yes there are many software aps for voip....