Looking for case frame for diy. Instead of modding a pc case I would like to try and build my own computer case. The only problem I have encountered is finding a source in the USA for the L shaped metal channel for the case frame that panels are attached to....

looking to see if they had any help/instructions to overcome this (some cases come apart and such), and no luck so I hopped on chat with them. While on hold, I am looking at the case pretty closely and pretty much conclude either (a) the case back panel...

LOL> I saw a site called montain mods and seen there case's and liked them, just didn't want to spend the $400 dollars they want for some of there case's I have the frame up and ready as you can see in the pics. I used Sheet Aluminum, and I am working...

my first lan since getting this case today, so im looking forward to some feedback from fellow gamers. :D but yes, its a great case and i highly recomend it. gotta add, i think those things you mentioned are fairly rare occurances. mine came in perfect...

to anything in the Celeron's case, I just duct-taped it to the bottom of the case. I can't fit any full-sized ISA cards in there now, but I've got my extra 8 GB of HD space and it's all been good since. Goddess forbid any tech who looks inside that case...

wink: ' Dust? Oh u mean that stuff that replaces my air...I thought it was good for u, just like radiation!:) That case would look very sexxy in black. Only if you let me see the Umpa Lumpa- Homer Simpson. Have you fastened the case to the floor? I ate...

you have to pick. Enabling vsync will cap you maximum frame rate to the refresh rate of your monitor which in the case of an LCD is probably 60Hz or 60 fps as each picture drawn is synchrnoized to the display frame. However do you really need more than 60fps?...

were low but still holding really steady then I would say you could safely look at the fault being with the GPU. But in your case with frame rates going very high and dipping very low, it's going to be memory or CPU handling tasks that ocassionally bottle...

side seems like it's impossible to remove and infact looks riveted to the case frame. Is this how it is? Will I be able to remove the top/right sides of the case removing the black outer case so as to fully clean this system? Bradley. Archived from...