1207 search results for lost raid what
OK
Filters
Ad
  • Lost RAID after BIOS update. - Forum

    Lost RAID after BIOS update.. I'm at work right now so I'm trying to remember as much as I can, please bear with me. I have an ASUS P5E with newest BIOS 0903 and 2x WD Caviar 750GB HDD in RAID 1 and RAID 0 config (Intel Matrix Management). I was having...

  • LOST RAID 5 DISK CONFIGURATION - Forum

    LOST RAID 5 DISK CONFIGURATION. Archived from groups: alt.sys.pc-clone.dell () I have 6 drives (one hot spare) from a RAID 5 config on a DELL poweredge 4400 with a PERC3 controller. I stupidly removed the drives, set them aside and when I picked them up...

  • RAID FAQ V1.3.1 - Forum

    be lost. For level 1 and level 0+1 additional mirror drives can added to provide additional data security. This will not cause any data to be lost. 5. Software RAID vs. hardware RAID. Which is better ? For the most part deffinitely hardware RAID. However,...

  • RAID 10 not working - Forum

    lost?. I have an external SATA drive bay setup with a RAID 10 configuration. The devices manager is saying I need to rebuild drive 3 and drive 1. I have data on the drive that has not been backed up. If I rebuild the two drives, will data be lost? In RAID...

  • Promise FastTrack 378 PATA/SATA RAID - Forum

    as I was using the controller without issue (or at least was able to see and use the raid for storage, as I was having some sound issues) but after an update to SP2 lost the RAID and have been unable to find drivers to restore functionality. Has anyone knowledge...

  • Question about Raid 5 - Forum

    disks at the same time, this will give better performance for writing, and reading as will because it will read from both disks at the same time, if one disks fail, all data will be lost. Raid 1, security basically one hard disk is a mirror of the other,...

  • ASUS P5W DH Deluxe RAID controller. - Forum

    am also planning on contacting ASUS about this. Doubt they have any info/help/compensation for the time/money lost with the RAID 5 issue. If your looking for real robust raid storage you should go serial attached scsi. If your looking for good raid storage...

  • RAID Without Additional Hardware: Do It Yourself With Windows 2000 - Reviews

    Drives). However, many users do not consider Mode 0 (striping) to be a viable RAID mode because it does not add redundancy, meaning that it can put your data under a high risk: If one drive fails, all data on the whole drive array will be lost. RAID 0 arrays...

  • RAID: A Comparison Of Different Modes - Reviews

    drastic performance boost comes at the price of higher fault vulnerability. Instead of one, now all of the RAID drives must work error-free. If even one of those drive crashes, all of the stored data will be lost. RAID 1: Mirroring Mode 1 is basically the complete...

  • Finer Points On RAID Controllers - Reviews

    in a redundant array system, a large RAID 0 that does not use the entire capacity would be the thing. The rest could be handled by a RAID 5 that stores the really important data. In the case of failure the content of the RAID 0 may be lost, but RAID 5 does...

Ad