it might be a problem with the game then, try a different game. use Fraps and do some testing before and after what is the stock clocks then since overclock is 670/1444/1134 576/1242/1008 haha maybe that's why, try lowering your overclock to 625/1350/...

clock 681, mem 1099, and a lower shader 9I don't exactly remember). I've tried setting all the values in that nvidia tuner, w/o the evga precision, and still nothing. Moreover, I tried lower overclocks for each card, and the same still happens. I'm running...

RAM voltage, PCIe voltage, etc). "Auto" lets BIOS automatically set the system voltages as required. I recommend that you set this to "Auto" only if your overclock is small like 10-11%. Set this to "Disable" if your overclock is high (i.e. 400+Mhz CPU...

again) but it is only benificial with the right hardware as some do not overclock very well. Also if you overclock too much you may higher clock and memory speeds with full stability but will actually see lower performance then a lower overclock setting depending...

if there is some thing wrong we can return the card. You need to lower the overclock. Sorry, can't see your picture at work. i dont get it. how i can lower the overclock. similar condition is observed when i increase the core speed from 650MHz to 660MHz....

b][/b] and use it to handle your overclocking and keeping track of your temps. After you have used Rivatuner to properly overclock your card, use [/b] or [b] to test your overclocks. Lower your overclock or use Rivatuner to raise your fan speeds as needed....

95 other then the fact in random 4 of the workers will cut out right after starting but I managed to heat test through other methods. ~Bump If you think that the RAM can't handle the overclock (run Memtest86+ to confirm this), then either lower the overclock...

must be able to enter Windows, and run a stress program for several hours, like Prime. Then, and ONLY then if you have no problems, can your overclock be considered succcesful. You need to go back to the drawing board, or lower your overclock until your rig...

1:1 memory is not over voltaged as far as i remember. If you havent done that already - download Memtest and test the memory. Download prime95 and stress the cpu/check for errors. What memory is it(speed)? System specs? Easy solution, lower your overclock...