FS: MACKIE 1604 VLZ 16 CHAN. MIXER --EXC+ COND. Archived from groups: rec.audio.pro () I'm selling a Mackie 1604 VLZ 16 Channel mixer on ebay if anyone is interested. It's in excellent condition, was used very sparingly as an auxiliary mixer in my studio....

Archived from groups: rec.audio.pro () + wrote: > 6 hours (5 nights a week)24 channels 24 bit 44.1kHz This is potentially a non-starter. Each channel's .wav file calculates out to be almost 6 GB. Given that a .wav file can't be larger than 2 GB for...

a modest system consisting of six decent Shure wireless mics. They also add a wired mic for a hand drum and sometimes attach a mic'd acoustic guitar. This all feeds a Mackie 1604 mixer that feeds Mackie powered PA speakers and stage monitors. Now they're...

my Mackie 1604 VLZ Pro so that the Mute buttons affect prefade sends as well as postfade. I use it primarily for live work, and when I mute a channel, I want it out of the monitors as well as the mains. Before I ask Mackie for the schematic and figure...

possible config would be Mackie 1202 vlz Pro Mixer with ... audiophile 24/96 < Yes, that will work very well. If you need more sound card input channels M-Audio makes the Delta series with equally solid drivers. The advantage of a mixer over separate...

into that - including sometimes just the mixer - >that you will be creating a loop antenna. I've seen places where you just plug a mixer into the AC and connect the speakers and you get RF with no mics plugged in. Archived from groups: rec.audio.pro () Thanks...

anything including RCA cables etc. >> What is the best method for attaching these to a Mackie 1604 VLZ so I have > a minimum of button pushing to switch between them? You should get a box with a switch so you don't have to push any buttons on the mixer...

Mackie mixer repairs. Hi, I have a Mackie 1604 VLZ Pro. It has been a great mxer, but recently I've learned that the trim/gain knob on channel strip 1 is non responsive........ any ideas? Other than that.. she's been good. I appreciate your feedback....

3) Since the Mackie has four balanced Aux sends, I could send each of >channels 1 to 4 to Aux 1 to 4, and run those into four channels of the > 828mkII. Certainly doable, but counter-intuitive, IMHO. > (4) The Mackie has a "recording out" DB-25 multi-pin...

Mackie 1604 vlz and LynxOne card do I need adaptor cables?. Archived from groups: rec.audio.pro () Hi everybody, I just bought a used Mackie 1604 vlz (I assume this is the pro version). I own a LynxOne card. Do I need special adaptor cables to connect...