you are wasting the time and effort to make patch cables by hand. Factory made patch cables are available in bulk for as little as $2.50 for some of the more inexpensive ones. If you figure the cost of the connectors, the cable and finally the labor involved...

TLS to XLR. Archived from groups: rec.audio.tech () Hi All, I want to make a patch cable. I am trying to go from 3.5mm stereo jack to XLR keeping the stereo separation. My input destination is XLR audio connectors on the rear of a camcorder x2. First...

pre-made patch cables go...that is what we buy 95% of the time, but in certain situations we need the cable to be exactly the right length usually due to space considerations. moreover, sometimes we need 50'+ cables, and those are typically not so cheap....

when buying this for making a home LAN? Is the PVC jacket color an issue at all? Also, What is the purpose of that fiber strand in the cat5e? Stranded Cat5 is for making patch cables. It is more flexable, but has a shorter life. I would stay away from...

the best cables I can, I can't find any reviews. Anyone have any advise? How would one test all patch cables? Look for quality connectors and check the assembly to make sure that all wires are secure and properly inserted. I've rarely seen poor quality patch...

How to make a shielded cat6 patch cable. Archived from groups: comp.dcom.lans.ethernet () Hello, I need to know how to make a cat6 shielded patch cable (sstp/fftp). All sites I have found explain how to build an unshielded cable (cat5/5e or cat6) :-( Do...

jack on the wall (or anything other than directly to the switch) then you could have several problems: 1) Reseat the patch cable at the panel/network switch. 2) Use a cable tester to make sure the full path from the patch panel to the destination...

Adam T wrote: > message 'The network kable is unpluged', but, in fact it's > connected. If I change speed in network card settings for > 10 Mbps everything works properly. Did you make the cables yourself, or were they purchased from a reliable manufacturer?...

first time) at a high school. I wanted my students to have the opportunity to make straight thru patch cables and crossover cables. The straight thru cable worked fine. Some cat5 cable, RJ45 jacks, and a crimper and we were in business. The fun has begun...

day, the cables from Markertek arrived. Long story short, they refused to take them back. I was stuck with two sets which I didn't need. Worse example: I ordered a set of about a dozen or so custom patch cables -- they would be making them up to their...