I generate to make the tape? The guy just help a swab with cleaner on the back of the head and waited till the output looked like a square block. Thanks as always, s.. Archived from groups: rec.audio.pro () Can I make a DAT alignment tape? I have a known...

an NPR radio program, transfering 1/4 inch tape masters to computer to clean them up. Out of necessity, we've been baking most of our tapes to get them to play properly. Recently though, the current season (from 1989) I'm working on used mostly AGFA 469...

any substatianting evidence. > I have been talking to the RMG guys. They've been making tape since the early > 1970s, and they have basically been saying for the last year or so that they > were going to be back in the mastering tape business as soon...

about making the tape good as new again? Haven't you been reading about how difficult it is to buy new audio recording tape these days? We've learned a few things about the chemistry of tape binders since the early days of the discovery of the sticky...

27" TV a lot > better. >>>> If I want to check a picture to see if it was >>focused properly, the small 1.5" display is no problem because the >>picture can be zoomed (up to 14.2x) and scrolled left, right, up and >>down, making it equivalent to...

as printing normally to the same type of machine > set up as a quarter inch two track? Yes, except that 1/2" tape might be better guided. Tape decks are as mechanical as they are electrical and magnetic. > I'm thinking about buying a half inch four...

remember - - when I make a tape (beta SP) for a TV station (at least a weekly occurrence at our shop here), I always reference the tone to 0, and then make sure the peak audio level...

decline > of analog audio tape recording and the status of the suppliers > of the raw tape stock. If your only interest is to REPLAY analogue tape, new tape stock shortage isn't really a factor. That said, anybody is welcome to buy my A77. But...

press a button, and voila! A > : CD! As easy as making tapes from your albums! >> Where's the turntable? Where's the CD recorder? What question do you think you're answering with these useless links? To answer the original poster, nobody makes...

Currently we use tapes which are poor quality as the decks are old and worn and also, they can only be duplicated is real time or the tapes can be run at double speed to reduce this time. We now need better quality and more omportantly we need to speed...