10653 search results for manual bios settings
OK
Ad
  • Manual Bios Settings - Forum

    Manual Bios Settings. Hey guys. I just upgraded my system and I was wondering if anyone had or new where I could find manual bios settings so I can squeeze a little more juice out of this system. My specs are as follows: Asus M4A79T Deluxe Mobo (Socket AM3)...

  • GA-EP45-UD3P Bios question - Forum

    then we can go into your bios to adjust. You may find that the defult settings for our motherboard are Ok for you. If anything seems like its running too hot then I can help you figure out what settings in the bios you may need to adjust. good luck....

  • Accessing BIOS on XP Home Version - Forum

    fellers! >> Fred >> Archived from groups: microsoft.public.windowsxp.hardware,comp.sys.laptops,comp.laptops,microsoft.public.windowsxp.setup_deployment,microsoft.public.windowsxp.basics () No idea - nothing in the manual on BIOS or hardware descriptions....

  • Accessing BIOS on XP Home Version - Forum

    to change BIOS settings from within Windows. You most likely do not have one of these motherboards and even if you do, I would not recommend you play around with it. :) ---- Nathan McNulty Fred wrote: > How do you access the BIOS setup menu with...

  • ECS A785GM-M: BIOS And Overclocking - Reviews

    nine, it would revert to seven as shown in CPU-Z. The other settings would take, but not the latency. When I reported this to ECS, the company sent a special BIOS for testing, which had support for memory command rate and the manual latency settings...

  • HELP! Overclocking failed... on ASUS P5B Premium & Q6600@2.4Ghz - Forum

    tested) and "AI Booster" ("A utility to do overclocking" I.E. a fancy windows GUI for altering the BIOS settings) I've spent the last 3 days trying to get this to play nice, i'm familiar with the BIOS setings (not sure about the Vcore settings i'd need...

  • Setting the memory speed right (?) - Forum

    Gigabyte x38-ds4 bios. This is what I have: OCZ Titanium PC2-9600 2X2GB @ 2.15v MB: Mem: and the BIOS (not my settings): I don't understand...

  • my amd xp 3000 says its a 2200?? - Forum

    should also check that your vram is 2.7, and that your primary graphics is agp, as well as a bunch of other things. Reading the part of your manual about bios may help a lot. i dont have my manual any more. but no i fucked it up bad. i swiched my cpu fsb...

  • Bad Memory Socket(s) on GA-MA790X-UD4P? - Forum

    Hi R Have you tried setting the mem voltage & timing manually in the bios to manufactures recommendation? By default, the "DCTs Mode" item, on the "DRAM Configuration" portion of the "MB Intelligent Tweaker(M.I.T.)" page of the BIOS is set to "Unganged",...

  • Before I Build: Some Questions - Forum

    don't know if the supervisor password gets cleared on a reset or not. That should be in your manual. As for the bios settings, Leave the HDD settings to auto. If everything is Sata, use AHCI. This is the sticky for the i7 in the OC section, take some...

Ad