Noctua Fan Connecters don't match motherboard prongs. The fans have a 3 prong connector and on my motherboard (asus p6t deluxe v2) is a 4 prong. Or do I have it reversed but either way. How can I make this work? Do I plug the fans into the chassis connector...

CPU's FSB match Motherboard's?????????. Hi. Amd Athlon 64 socket 939 CPUs have 2000 MHz FSB right? Do I need a motherboard that supports 2000MHz FSB too, to use all of the CPU's FSB? If a motherboard only supports 1000MHz FSB, is it gonna only use half of...

compatible motherboard and a standard ATX case. Dell uses primarily Intel-designed motherboards, so there is a generic retail equivalent (or 99% equivalent) Intel-branded available. It is important to match up the motherboard chipsets as closely as possible....

find one n/or if its really that important so i dont have to worry about it You might check here. @badge- thanks for the suggestion but I already checked that website n none of the i/o shields match the motherboard that I have An I/O shield provides some...

but faster than your motherboard can support (DDR 400 vs DDR 266). >3)would the E7205 board cripple a P4 3.06 HT GHz 512K 533MHz CPU ? No. Any CPU with a 533 MHz system bus will be an exact match for your motherboard. and the difficult ones... >1)...

a motherboard issue of supporting dual channel, or a stick issue of not being stable. As for the GPU, HD3850 should be considerably faster and smoother than x1950 Pro. I have a silly question really. Given this motherboard is not a "standard" motherboard...

as opposed to just a fool. You don't need a 4770 for 1280x1024 Maybe get 4670 for $69.99 Yeah I know its there and dont mind. I can't remember anyone asking to color match a motherboard before - but I guess it's probably happened. ...

monitor and mouse. And I do not OC the giveaway systems that I build. is that wood you use under the motherboard? It's an old cutting board. I have a nylon cutting board I have used. Also used a padded anti-static motherboard bag and I have used my Oblivion...

1. The motherboard is improperly installed in the case, shorting something out. This happens surprisingly often. Verify that the metal standoffs in the case exactly match the motherboard mounting holes. 2. Bad or inadequate PSU. A working PSU will send...

a new case? I have never done any work with placing motherboards into new cases, and I can see problems developing such as the power button, USB ports, the motherboard not fitting in the new case, ports on the back not lining up, etc. I am specifically...