Modem+router or dedicated?. im just wondering which should be better in performance and management. a modem+router or two independent hardware?. im just wondering which should be better in performance and management. a modem+router or two independent hardware?...

access point for 802.11b/g. It's hooked to a draft-n router which is dedicated to draft-n. Works like a champ. the 2wire model is 2701HG-B which I believe is the standard ATT dsl modem/router. My voip phone connects directly to the router through a WAN cable....

Connect USB ADSL modem to router. Archived from groups: microsoft.public.broadbandnet.hardware () Hi All, I've got a USB modem and a wireless router and would like to share the broadband using the router. I realise I really need an ethernet ADSL modem to...

feel free! 1) The easiest "wireless" solution would be to get a Wireless 54g router with built in adsl modem. The only one I can find like this here in the UK is Belkin Wireless 11g (54Mbp) ADSL Modem+Router F5D7630UK4A @ £123. I have seen some mixed...

team, and replaced every wire, splitter, and connection point in it, they also ran a dedicated line to my computer setup, which basically solved all the issues I was having. I really don't think the brand of modem matters, basically if a modem is bad, once...

across the Internet. I've tried numerous things, up to and including switching from cable to DSL, rebuilding the router settings after doing a factory reset - - and even by-passing the router and connecting the host directly to the DSL modem. I can...

connects to the speedstream modem/router: Q: How to use the standard 5100B as a simple router (#11077) A: For those that want a cheap, easy way to share their SBC DSL with multiple computers, the 5100B CAN be used as a simple router....

able to connect? where does the cable modem fit into this? You run the CAT 5 cable from your cable modem to the router. You will give the router the name that your cable modem service gave your computer. From there the router will assign IP addresses to...

incoming connections) and remote user identities have been setup. The LAN accesses the internet via d-link dsl-500 modem/router (which is supposed to have VPN pass through capabilities). The router has port tcp 1723 redirected to local ip address of the...

I'm wondering is that, with the old setup, I ran the line first into the cable modem, then to the router. From there, I had a cable connecting the router to my desktop PC and two laptops that worked across the wireless network. Having no cable modem in...