if you need me to clarify anything. Thanks. Does the router have a built in 4 port switch? if so then I would configure it like this. cable modem ->switch ->router ->addon pcs. Assign one ip to the router and the other 7 to the other computers. If...

I had considered these, but they have dual WAN ports, so my question is this...would I go from the cable modem to a switch, and dual lines out of the switch to the router? They are also listed as "Redundant" routers, and my concern is that they are missing...

question is... What's the difference between a switch and a router? Can you get the security of a router with a switch? If not, does anyone sell gigabit routers? Thanks Router's join two or more networks. In the market your talking about it's usually...

least one wall, and each cable went from that room to the basement. Each cable was then wired to a small patch panel that was attached to a piece of pegboard. Attached to the peg board were the cable modem, a switch and a router (as well as all their...

ADSL Router Question. In my flat currently we access the internet through Software NAT on Windows XP pro. A USB ADSL modem @ my pc and the connection shared with 2 other pc's through a 4 port 10/100 switch. The many downsides of this include the need for...

to configure the router on one pc. Is that done in Network Properties with tcp/ip? Use the Linksys BEFSR41. It squite a nice product (a small box). An "internet gateway" combines a switch and a router into one. It "routs" traffic from the cable modem and "switches"...

and the gateway to 10.0.0.2 and removing the belkin router out of the question and then maybe add a dhcp client on to the win xp pro machine.. or do the same thing but just plug the modem in to the switch... can ppl suggest the best way of getting...

they call a MAC table. When ever you switch devices NIC, Router or Xbox you have to restart the modem to clear the MAC table in the modem. Soooo restart the modem and once it sync's up restart the router or renew on the router web flash. Let me know if this...

a 1Gb 8 port switch. I know the Internet traffic will be going to the router. My question is will the file data traffic between the PC's on the 1G switch, will that be going in to the router and back out to the switch to get to each PC? PC's are running...

adsl modem to switch (yes no router...) 2 computer to switch Computer 1 xp (master) ppoe to internet ** dual nic into switch** Computer 2 xp (slave) to switch (internet via computer 1)same workgroup. Bridged them (d'ont know what it's good for but...