when I installed Vista, but when I tried to revert back to XP with new drivers, same problem! It goes to sleep right after the loading screen (well, my monitor claims no signal). I've got a Asus A8R-MVP motherboard, with crossfire. I'm really at a loss...

Monitor claims theres no signal.... I turn my computer on and with in 5 second the monitor has a message that says there is no signal to either the dvi or vga... then the monitor says "monitor going to sleep". i didn't do anything out of the ordinary and now...

a digital video signal. It supports 720p/1080i over component, and 1080p over VGA, which is not compatible with HDCP and is not included with the 360 ($40 for adapter). You don't need a G80 or a 30" monitor to support HDCP. Several lesser cards and even...

going to find without paying to much of a premium price for the monitor. A claim of 5ms should mean that the LCD screen can change the pixel color in 5ms, but you have to consider how long it would take to change the signal from VGA to LVDS. On average I would...

to go really annoying. If I switch off the monitor, change resolution and refresh rate, change the input type from Digital to Analogue, the monitor screen goes black and stays black (even the "no signal" doesn't appear on the screen). The green power light...

is the standard level for any monitor claiming wide gamut as part of the specs. Panel types basically determines the image quality and viewing angles of an LCD monitor. There are 3 basic types: TN - Inexpensive, poor to fair color accuracy, poor viewing...

the KVM switch, just connecting one of the computers directly to the monitor, just as it used to be, and it still reports that the monitor has a max res of 1024x768. It gets stranger. The on-screen display (OSD) on the monitor also claims now that it's...

No John you make the "fallacy" of say that I suggested that there was universal coverage of HD in these countries. First HD is a resolution. Either COFDM or 8-VSB is capable or transmitting a signal that carries an HDTV resolution DTV signal. Second...

preamps is it's less wires to deal with, fewer chances for ground loops, and you get preamps AND a monitor section. And you can put a cheap hardware reverb box on an Aux bus to monitor with reverb for inspiration. That's a lot harder to do with separate...