saver mode. It is putting out a signal. Some monitors that have dual output have a menu option to enable the type. That's the only other thing I could suggest. The adapter shouldn't cause the monitor to go to power save mode. I found a solution......

it seems the MONITOR is stuck in this "power save mode" and NOT the computer. Sorry for the length, I just wanted to point out those things that I have already tried. The most relevant info I can find on a google search is messing with the power save mode...

ATI 4830 causes monitor to go into power saving mode Win XP. Recreated this thread in the more appropriate forum hoping to get some assistance. My fingers are crossed. . Recreated this thread in the more appropriate forum hoping to get some assistance....

the same with both....what can I do> oh, and It goes into power save mode after the windows driver bar is done...when the next screen should be windows desktop...is when it goes into power save mode. Same problem here. Monitor goes into power saving mode...

17sf2). My computer turns on, but the monitor now just automatically goes to Power Saving Mode and I see a black screen with nothing on it. I know the monitor is in Power Saving Mode because the yellow light is on along with the Power Green light. I changed...

this monitors power saving mode completely off? I tried turning power saving off via the power saving menu in WinXP with no luck. Gateway's site and the user manual are no help either. My problem is this - Power saving mode turns on [monitor power...

CP locks up during the evening, lookign for monitoring sof... Archived from groups: microsoft.public.windowsxp.general () PROBLEM: pc works fine all day, goto bed at night next day monitor is power saving mode and unable to get display back. Cannot shutdown...

the power light on the case blinks on and off. In all other respects it looks like the PC is still running. Is there anything I can do about this? It sure doesn't seem like an effective power saving mode to me! -Jon ULTRA 500 watt PSU DFI NFII...

as if I shut down my computer WHILE the computer is actually still working. And the monitor’s power indicator “green colored” keeps blinking (= power saving mode) instead of glowing green (= normal operation). I tried the Power Options from the Control...

And the monitor’s power indicator “green colored” keeps blinking (= power saving mode) instead of glowing green (= normal operation). I tried the Power Options from the Control Panel and I set the “Turn off monitor”, “Turn off hard disks” and...