PCIe with PCI card multi monitor woes. Hi there, I recently just purchased an ATI Radeon HD 3870 PCIe card to jump back into some (light) pc gaming. I previously had two bare-bones Radeon 7000 for four monitor support. Once I installed the PCIe along...

Monitor Woe's. I have a intersting problem with my moniter. When displaying the lighter colors, I have these very faint arching lines going across the screen, usualy coming form the cornrs. it does not seem to happen in games. Any ideas? <font color=blue...

Monitor Woes. Hey. Recently i moved to college and it did a number on my monitor. I have a mitsubishi diamond pro 920 (19in, .24dp). Here are my problems; 1. The upper left corner of my monitor cannot display red, or displays very little bit of it (if i...

monitor woes. Hi, Recently, I decided to build my very own computer. I made a few bad choices here and there but I ended up with this: Pentium 4 1.9Ghz 400Mhz FSB Asus P4B533 80GB 7200 RPM western digital Generic 512 MB PC2100 DDR RAM <-- I know!...

Dell D1626HT monitor woes...... Archived from groups: alt.sys.pc-clone.dell () Hi De I have the above 21" monitor - it powers on and goes straight to standby (have tried two different cables/pcs and checked the plug etc...) My brother had the monitor...

Monitor Woes. I just returned from BB; I needed to see monitors in person. From their prices, selection, and my eyes, I narrowed the monitor selection down to three models. Samsung 245BW - $350 (clearance) Hannspree (HansG??) HF-289HJB -$580 LG L246WP...

XP Pro; Dual Monitors; ATI Radeon VE Woes. Hi, Just a question for all of you who are using XP and have dual monitors running off a ATI Radeon VE or equivalent videocard. Do all of you have odd usage of dual monitors in XP with the HydraVision software?...

CRT Woes!!!. Just bought a used 19" Compaq V90 Monitor. Here's the wierd problem. I get a black desktop when 98SE boots. Under Linux its fine. When I hook up my old 14" Yakumo Monitor to it my system boots to its 800x600 configuration. Don't know what else...

I went into the BIOS and the hardware monitor stated that the CPU temp was around 51°C/125°F. I went to the hardware monitor again this evening right after starting the computer, and the monitor reported a temp of 47°C with a CPU fan speed of 1734 rpm...

drained, but I'd received no warning from either the status monitor or the printer itself. I had a quick shufty at the ink levels in the status monitor and it was showing that the black was still roughly half full (even though it was obvious to anyone...