More useful tips for the Overclocker in you! :). heres a little gem... helps u calculate the max heat output of your overclocked chip... may be useful... or not <A HREF="http://www.heatsink-guide.com/calcpower.htm" target="_new"</A> mine was 66W for...

cooling. Also while I'm at it: I could use a small guide or some tips for overclocking this CPU. I know the basics, but some aditional help might be nice. Like what to overclock, how to overclock it, maximum overclockability ect. I won't need to unlock...

Overclocking Q8200. Hi guys im pretty new to overclocking, i was hoping some of you will be able to give me tips on overclocking my intel q8200. I currently got it oc to 2.8 ghz im hoping to get it up to 3.o ghz . Currently my idle temps are 37c and under...

fsb + and 2.46ghz cpu speed can be achieved. Final tips for overclocking. A good way to start overclocking is to download clockgen for your Athlon 64 motherboard. With this you can overclock the FSB in windows, run PRIME95 and 3dmark 2001 for a few hours...

it now. it just doesnt want to take dual channel setup. am i missing another bios setting somewhere? ****edit just tried playin with timing per posts in this thread. set to 4-4-4-15 @ 1.9v - seems to be workin fine so far. thanks for the tips all!...

settings should i use? thanks a lot Hey that's a lot of ground to cover there. I'll give you a few tips: If you will overclock, then the 2500+ will destroy the 2600+. Just because your computer will boot with the CPU @ 149Mhz does not mean that it...

also. Dont over look the power supply though make sure it can give you the extra juice you will need for the overclocking. Check out the overclocking section for tips on your overclocking if needed and good luck with what ever you decide to do. :) mactronix...

9700 to come out at the end of this or next month but I may just go with the leadtek and overclock it. Any input would be appreciated and any warnings or tips about overclocking this setup would also be nice. Thanks alot guys. Looks OK to me. At least...

3.6GHz with 1.3875Vcore. I went with 3.7GHz even though it was less efficient. There are some stickies in the overclocking section here that have many useful tips on how to overclock. Reading can't hurt...or can it? I had my E7500 OC to 4.2GHZ stabel after...

MSI PLATINUM 750I. 3. RAM HYPER X 800 MZ overclock to 900 MZ. 4.GPU GEFORCE 250 GTS 1G. 5.PSU COOLER MASTER 1000W Real Power. can u give me the tips how to overclock and can my GPU overclock with 900mz rather than standard 740.. hai there, i have problem...