that asks 2.1 - 2.3v voltage. I am planning to buy the ASRock P45XE motherboard and just want to be sure that the ram kit is compatible with the motherboard and also the voltage of the motherboard can sustain the memory. Thank you. Constantin Chirila. I have...

and started to get errors. My questions are mainly about voltage drops now. I noticed them yesterday, and became concerned. Motherboard Voltage set to 1.1875 in Bios and according to CPU-Z, voltage is dropping to 1.136-1.152 Volts. This is a voltage drop...

IOH CSI voltage to 1.46V Hi i tried starting from the begining cleared the cmos. main, set date and time. Smart. Load Performace setup default (ide/sata) Advanced. voltage control ioh csi voltage set at 1.46v ...

voltage and cpu multiplier. You'd want to turn those features off anyways if you plan on going for hi overclocks. The Core i7 CPU asks the motherboard for the voltage level it needs according to whatever load it's currently under. When lightly loaded it requests...

Voltage for E5200 3Ghz( 240*12.5). I want to OC my Intel E5200 from 2.5Ghz to 3Ghz with a FSB of 240 and 12.5 multiplier on Abit IP35P motherboard. Which voltage do you recommend me ? Is it enough to keep the standard 1.125V or is necessary to increase it?...

Vcore voltage can't be over 13v or your processor would have bit the dust immediately. However the total voltage available from the power supply may be exceeding 13v, and your motherboard voltage regulator may have a problem regulating it, and its giving you...

typo, yes HT bus/multi .... I have mines at x10 2000Mhz on my motherboard this is what i have collected. CPU Voltage Control Chipset Voltage Control Processor Voltage Control NB FID NB VID Alternative VID DRAM Voltage Control wh...

XMS 2 DDR2 800mhz 1:1 standard timings no voltage screwing further.. @ abit ip35 pro motherboard. or you could go with a safer zone, lets say, to 3ghz without too much hassle i believe at 1,31 vcore voltage. and it would serve you very well... also...

wrote: >> Is it just "drop-in" or Will I need >>to set the processor voltage/speed/multiplier manually? >>Depends on the motherboard. Voltage *should* be no problem, The motherboard is a uATX board that only allows setting the FSB - no CPU voltage...