Odd ISO Mounting Problem Need Help. I am running into some issues that are frustrating to say the least. I made an ISO from my copy of MoHA, Medal of Honor Airborne game, using MagicIso. It immediately failed when I tried Magic’s virtual drive, so I tried...

mounting problem redhat. im a complete greenhorn when it comes to linux but i am still tech savvy. a friend of mine brought his linux comp to me when it wouldnt boot and im looking for some help in diagnosing and solving the problem. what i know: its...

were to open your monitor > case and make sure all components were securely mounted in your desired > viewing position I think you could fix the problem. The component mounting isn't the problem - a PC monitor actually has higher tolerances for the...

so this may be why Canon hasn't fixed it. There's no consistency to the problem. (I don't mean to cast doubt on the fact that you've had the problem.) >> What is emerging here indicates a droop in system voltage caused by > compromised electrical...

to the left (when the case is vertical). From your last comment, it appears the case is not square and has probably been stressed out of shape during shipping. Have you checked the MB alignment for mounting problems? If it was me, I would send the case back...

what you did... You took a Gateway apart and tried to put the motherboard and parts into a different case? Why on earth would you want to do that? If that's what you did, my first thought is were there any mounting problems with the Gateway mobo in the...

machining... Ack - just dawned on me - shoulda mentioned that - I've had a Freezer 7 on mine, with no mounting problems, and, as I mentioned - it's the same board... I got it on - had a buddy with tiny fingers help, lol. Seriously. Good to go - thanks for...

would be going with the p6t regular version if i liked the layout of the board. plus the deluxe v2 has a few more features than that board. :D I just don't wanna get a micro ATX board, for gfx card size reason's and if mounting problems were to come...

the CD icon appeared on the desktop, but when I tried to open the CD, only three files showed up! I thought it was a mount problem, so I tried the command line and added a command to mount the CD and "unhide" the files -- that didn't work. If anything, I...

sharing. Uncheck simple file sharing. As far as net bios, some router have limited support. If your PC's are set to static, as you indicated, you may need to modify your HOST file. Once you have mapped your drives they should auto mount with out any problem....