In Elements Print Preview > Print Space, if you specify Use Printer Management, then you DO need to use ICM in the printer driver. [This disables color managment in Elements, and enables CM in the printer driver] or If you disable ICM in the printer...

Need help choosing a printer. Archived from groups: comp.periphs.printers () My wife and I are looking for a general purpose color inkjet printer. It must be able to print on ledger size (tabloid, 11"x17") paper. It will be used to print a variety of...

EX plus. I try installing the >printers using the wizard in XP i.e. choosing local printer, creating a > new TCP/IP port and choosing the printers from the list. However, I > cannot get either to print. I have a few Macs connected to the same hub > and...

are a local administrator on your system, you can create a local printer on your machine that prints to a local Port with the name of the \\server\printer as the port name. If you are not a local administator on your machine, you will need to coordinate...

Printer for Card/Stationary Printing. Archived from groups: comp.periphs.printers () Hi there, I could really use some advice in choosing a printer for my business startup. I will be producing cards and stationary for weddings, parties etc. I do not...

Some printers offer corporate drivers which just > support printing. > Archived from groups: comp.periphs.printers () I don't see why not. I have multiple printers on my box. It's just a matter of choosing which printer to send the file to AFAIK. Are...

a printer repair shop should be able to do the job in about 30-45 minutes tops. I am disappointed with the current cheaper HP PSC series of printers, the higher priced models seem to be fine. Choosing a printer depends very much on what you want to...

After two heads going bad, I may just go and get something else like an Epson. I liked the fact the Canon printers had separate ink tanks but if the heads don't last that long, then it's a bad criteria for choosing a printer. Jean Archived from groups:...

or choosing the printer I want from the >>application. Everything else seems normal. Go figure. I >>need to change a port setting and the only way yu can do >>this is from "properties" in the Printers and Fax. Now >>what do I do. I there an alternative...

on the market. We cannot help the OP fix the problem without knowing what kind of printer it is and what the distro is. CUPS should already be installed by default, shouldn't it? It's just a matter of choosing what printer you have in the list of available...