easily. BTW, mine is a C0 w/o any issues whatsoever inside a Cooler Master HAF932 like yours. I hope it worked out fine for you but if you need just leave further information and someone will help you. take care. ...

often need some help in keeping their cool :lol: . can you check and see that your fans are working together? ideally, one should pull in air, and the other should blow it back out the other side... its this air movement that really helps your temps. was...

OS, and software install if all they need to do is a quick CPU/mem upgrade. Wow that Chart was very detailed and exactly what I needed! Thx JuiceJones :) After looking over the data and checking out newegg I decided to go with a 8800 GT 512mb!...

Use These Setting Either Way Voltage Settings: CPU Voltage Need To Be Set At A Minimum Of The VID (core temp will tell you the vid and stepping of your processor). I Set Mine Up Above The Vid Due To Vdroop and Stability Issues. DDR Voltage 2.000V or...

you a few post before. The temps I gave you are after the fan mod. Nice clean look buy I think you would see better temps with a higher CFM fan. I also think you could drop you NB voltage a little which should also help your temps. I have a Q9650, overclocked...

This would increase when playing games etc right? What is a safe temp? Maybe I should put it back to 100mhz till I buy a better heat sink. A lot of questions I know but thanks for the help. Your temp fine CPU can handle 95c oh :) Just that in the other...

for idle. 60-65c will not hurt that cpu. reseat the heatsink, even my rubbish akasa nero gets better temps than that, and it's in an antec 300 case with dual 4850's. And it's summer which doesn't help temps. Then change cases. What we are trying to tell...

help me figure out, how to get my cpu, not 4.0 because to me that just impossible right now, but as high as we can, with some help and hints i think we can do it, here are some info ya shall know to help: ambient temp: 77C stable over clock: 3.4 @ stock...

SLI temp issues.. Hey everyone, As I recently posted in another thread I got 2 8800 GTS' when my old dual 7900GT's went south. Now, my issue is that it is showing 1 of the two GPU's temp at a steady 72C degrees. Now I know that is too high. I downloaded...

with the factory thermal pad, I was having 50c idle temp and 70c max load temp. I thought this was too high and started reading the forums here about temp issues. Everyone keeps saying to change to Artic Silver 5, which I did today. Now I have idle temp of...