enough that I don't really need to RAID 0 them. Thanks for the input!! For a RAID 5 you need as min 3 HDD, it's why I say what 2x750GB in RAID 0 is a 1.5TB. with this, and the other two 1.5TB you can do the RAID 5. ...

enough? Do your drives ever shut down for random reasons without actual damage just some weird electrical anomaly? Why do you need RAID 5 in the first place? Can't you just back-up for your old stuff by moving it to another drive, instead of trying to combine...

Need Help about Raid, format disk, OS, etc... HI all! I have a few questions... Okay, I understand that if I were to configure Raid 0, I need at least 2 Hard disks, and if Raid 5, then I need 3 Hard DISKs... Right now, I have 3 so I want to configure...

ICH9R; RAID 5; cannot re-add drive to volume. Hi, i cannot re-add the 3rd drive to my raid 5 volume after a crash. im very sad about it because i need data-redundancy (important data -.- cant afford to lose it) Mainboard: GA-P35C-DS3R (ICH9R-chipset)...

using SSD helps as their wright speed is not thel ightning fast part. SSDs themselves will give you a huge performance boost for booting and loading your programs, so you probably don't really need RAID unless the point is to get a larger OS volume to hold...

is another important thing for all this video. I believe RAID 5 is best in this situation; it will take 15 TB and make 10 TB so that any one disk can fail. This motherboard should be able to take all 10 hard drives and make them into one disk with a RAID 5,...

250WD KS hard drive for o.s. and a Samsung 1 tb backup drive. In addition to this I am setting up a raid of four 320gb wd blue caviar drives. This is all in xp. I need a raid even though I am a home user - don't ask - or you can if you want! Anyway. I...

If you have external backup, and can afford some recovery time, then you don't need raid. I am surprised that you would recommend the Hitachi first pick As for the RAID it does appear that for what I will be using the server for I may not need to use raid...

the window says 'no logical drive found' and 'bios not installed'. Can you tell me what I am doing wrong? Do I need the scsi 320 controller card? Or maybe I need a raid configuration? I had the 29160N scsi card installed previously but only one u160 hard drive(...

max. Is it possible to connect 4 250gb hdds for this, and still have good performance (from dodgier hdds, with lower platters? it's still cheaper) And if so, what array do i put it in? Or should i go caviar 640gb x2 in RAID0? And do i need a RAID controller...