thats way too hot for stock settings Download cpuz, and open it, you'll see it. Are you that noob? Do i need to take off the AC5? How would I do that? Never really overclocked before. Never had the need to. But this temp is worrying me... I've...

need any temp sensors or flow meters. Just monitor your CPU temps. Keep it simple. The WCUK rad isn't big enough, great pump/res with that kit tho. Use Deinozed water and some silver wire as your liquid, don't need anthing else. What am i looking...

it. I'm telling you, that based on what you've told us: 1) Your new to EQ and thus don't have hoards of fiends, experience, and twinkable gear 2) You like to solo and don't like to group 3) You feel you need temp in order to make any sort of reasonable...

or anything that has a hole (as close to the NB as possible)..... Could i put a small hole in my mobo or would that be ill advised ? I really think i need to get the temps down on my NB-----I am gonna go through and try to do some better cable management-----i...

be enough to cool it? I should probably just take my machine out from under the desk, dust it and see what the temps look like then. Yes, you need to get the temps down. It'll shut off by itself at 100 (I think), but problems begin (arguably) over 80. Yes,...

at 4.0 on anything under 1.3825 vcore . This is with stock NB voltage and loose timings 5-5-5-15-30. I have had it as high as 1.42 at 1.39. Before you go any further you need to get your temps in check. the cooler im using is a silverstone nt05 its pretty...

I need good suggestions from the experienced one's :) ill share what i have in my mind aswell... Lets start with the Rad/Pump/Reservoir/Tubes n all the small necessary stuff that ill be needing... Looking forward to all the possible help.. :) Have you...

a 1000 watt power supply is what i would like to have even if i dont need it now, just for future needs. to break it all down i dont need the very best processor but would like to be set for a while. dont know much about the I chips but if they are going...

you want to madly OVerclock your GPU but temps are a problem, you are already water cooling it. So what more can you do, I was just seeing if this backside cooling was a feasible solution to help lower temps, and I wanted to share my project and results...