when you simply have no power running through the network cable, so it's either that the power to the router is off at that point, or that the cable itself has a bad connection...try using a different network cable, and you might get a constant connection....

How to Network Cable or DSL Modem. Hello, I am currently running a network with router that connected to a computer which is using a modem to connected to the internet. I was reading the Cabel/DSL router. I am planning to upgrade to Cable or DSL. How does...

Controller network card. The router is a Netgear wgt624 v3. I have followed instructions on other pages and tried to connect directly to the router with an ethernet cable. I get nonstop alternating messages of "network cable unplugged" and "connected,...

I don't think the router HAS an uplink port (this is the 1port version). Just reading the router manual it says: "If you are connecting the 1-port router to a hub or switch, plug one end of a network cable into the router's LAN port, and the other end into...

helps alot and the way you described the network is how I origianlly set my network up. Cable modem =>router=> computer, computer, wireless.... What confused me is when I used the windows XP network set up wizzard and told it what my configuartion...

Making a network cable. I was looking at making a netwok cable for inside my house and needed some advice. If I am making a cable for a router to a switch, would I need a regular cable or a cross-over cable?. I was looking at making a netwok cable for inside...

can run network cables from the router to each PC. You'd need to purchase a router (and a network card if you don't have a spare) ``````````| Coax Cable ``````````| ```````[Modem] ``````````| Network cable `````````[Router] ```````/```````\ Network...

be easier? He still has to mess with his IP settings, then he has to buy a NIC, a router, then he has to MAKE a crossover cable..... Look if he is asking us for help with this then he does not know what a crossover cable is or what a router does, besides a...

the other router. I just uplinked it to the network thru the switch. Is it possible to somehow choose whether you logon to the internet thru cable or dsl in win98? Or do I have to phyisically move the network cables from one router the other depending on which...