set up, it successfully finds a >>network connection, but goes the whole 90 seconds to verify network and >>then tell me that it gets no response from the name server. >>>> I've tried manually setting the name server numbers I have off my ISP's...

set up, it successfully finds a >>network connection, but goes the whole 90 seconds to verify network and >>then tell me that it gets no response from the name server. >>>> I've tried manually setting the name server numbers I have off my ISP's...

settings on any of the PCs. thanks weston, but i still can't get an outside connection. i can connect to my router fine, but i tried pinging one of the school's dns servers and got no reply. is there any settings i need to change on my router outside of what...

wired up then plug in the power on the cable modem followed by the router. This will make sure the router and the modem will communicate to each other the proper settings. I had to do this when I install my router. it might be possible that your pc is set...

Information field Repair option: If you set up or own this network, you might be able to fix the problem by changing the settings on the wireless router or access point to be compatible with the wireless network adapter on this computer Contact the network...

the router, and set type to HEX, it won't let me enter anything at all. What is the secret here?. Archived from groups: alt.internet.wireless () I am going crazy trying to set up WEP security in my network. My Toshiba modem/router has a self-generated...

Network settings problem? Cant change router with same settings. Settings: Router1: eth2+eth3 = bridge1 eth1=WAN(Internet) Bridge1= IP: 192.168.1.1/24 src-nat src address: 192.168.1.0/24, action:masquerade routing:...

Thanks for the help! with the modem handling the PPPoE authentication, set the router up for standard cable modem. (basically a hardware reset on router will set that up). then change anything regarding firewall and such on the router. yeah I tried setting...

have it running all the time, just when you're rebooting a device on the network. Since I installed that (a few months ago), I have not had a problem with a Replay (I have 3 5xxx units) communicating on the network. -- Mark Lloyd has a Replay 5xxx...