you absolutely will run into memory problems almost straight away. Because the memory won't overclock any more, your processor is also limited. SO - Instead, you will set the memory divider to run your RAM well below it's rating - Say, 800 MHZ. Now...

older versions of Adobe Encore & SoundBooth. My final thought of concern is that the FSB on the Q9550 is 1333MHz...however, the Kingston memory is only rated at a 800MHz (or 1066MHz). Will this "de-tune" the CPU? Or will it overclock the memory? Additionally,...

problem? Any help will be very appreciated. Thank You.. Hello, I have extremely irritating problem on this card: it crashes in every game I play and messed up textures appear! Card is not overclocked (720/1820). This seems like a memory problem, so I tried...

temperature or dust is a problem either. PC is brand new... only two weeks ago. I monitored the temp and values seem normal. As given in my signature. It's ASUS EN7600GT 2DHT 256Mb. Factory settings. Not overclocked. If memory was the problem,...

setting would require faster memory. I believe your board is like many others, reporting the CPU bus clock rate, but the memory data rate, so that the CPU bus speed of 200MHz would be selected, and the memory speed of "333MHz" or "320MHz". Then overclocking...

I guess I am confused as to why the problem only chooses to present itself randomly every few months? As in why does the computer work normally for a while and then suddenly decide the ram isn't doing alright? I would like to overclock the memory and processor...

should have went with evga but oh well il know next time....probably should have payed the wee bit extra for a 4870 to but ohh well.... so yeah anyone care to assist in clearing my remorse.... Yup i overclocked mine at 715mhz and 1250 on memory with no problems....

my hardware was incompatible? No, it said you had a hardware FAILURE. Normally this is an unstable overclock, or a memory or power (mostly to memory) problem. What did the file stress.txt say? You can try and repeat this test running one stick of RAM,...

one for 333 fsb). The memory runs at 1333mhz. My memory is listed to run at 1600mhz. Core2 CPU benefit very little from overclocking memory. Try dropping your memory multiplier to maximize your CPU speed. ...

This is overclocked memory, requiring higher voltage to run correctly than standard memory. You simply need to read your manual, find out where to adjust the voltage like everyone keeps you telling you, and unless you have a faulty stick of memory, your problems...