GTX 260 SLI overclocking issues. When I went into Ntune and OCed both the core bus and memory bus (core by 20,mhz and memory by 25) the frame rates in crysis were about 5 fps worse. I don't understand it, especially because i was able to OC 1 gtx 260 to 709...

EX-58 UD3R overclocking issues. Hey guys, Recently built a system for my brother: UD3R mobo i7 920 OCZ Platinum 6gb 1600 GTX 275 ocz fatality 550w PSU WD caviar black 640gb The system is up and running fine, but I had an issue when I started my...

Overclocking issues with ASUS M2A-VM (690G). I'm trying to reach a decent overclock with my ASUS M2A-VM motherboard and an X2 3600+. Currently, I have 2x512MB DDR2-533 memory installed, but I plan to replace this with 2x1GB DDR2-800 when funds become available....

ANNOYING 4200+ Overclock Issue. Hey Guys, I have an Athlon X2 4200+ (AM2), and I would like to overclock it to preferably the max it can go without a voltage increase. However, I have an annoying issue that I just can't seem to wrangle: I can OC it easily...

x1950pro overclocking issues. i have an x 1950pro with an accelero x2 mounted on it and a thermaltake toughpower 850Wpsu and the card temp is at 45 i dont understand why the screen flickers when i over clock my card even 4mhz. i have an x 1950pro with an accelero...

X1900XT Overclocking issues. The only thing that works for overclocking is this stupid D.O.T option that MSI built into the drivers. But that has a 2d/3d setting so it only throttles up from 500/1188 in games. Ati Tool says it doesnt support my card. Ati...

booted only to display this msg: "Warning the system is now in safe mode. Please reset overclocking features in SETUP MENU" Have no idea what its going on about ... wouldn't know an overclock from an under one :-) Any ideas ... TIA -- Kate. Archived...

and monitor your cpu temp dont let it exceed 60 degrees for this overclock. If you have any issues go back into your bios and set AI Overclock tuner to auto, this will reset everything to default. As I stated earlier you can play to your hearts content...

from DVD-rom but immediately freezes after a few seconds, in case i have to restart the system myself and the cycle is repeated again If this is an overclocking issue i can't figure out what it might possibly be wrong since i'm a total noob ( the reason...

draw 700w of power. The PC will take what it needs as long as the PSU can dish it out. I have no experience with the HD 4890 so you could also Google to see if there are any overclocking issues. So, is there no reason to be sucpitious of the 4 rails with...