Phantom power question. Archived from groups: rec.audio.pro () Hello everyone, I'm hoping some of the veterans could chime in here. When getting ready to use a condenser mic, this is typically what I do: 1) make sure the preamp/mixer is off and the...

from its own batter > or phantom power (I guess meaning a preamp). No phantom power does not mean a preamp. Phantom power is a method of powering microphones so that you don't have to use batteries, etc. Many preamps provide phantom power, but it...

enough to drag down the power long enough for the device to think that it's been disconnected. Un-plugging and re-plugging the USB cable with the US-122's phantom power switch on brings it back to life, with phantom power. According to the manual, you're...

you know first of all that you're going to take a sonic hit on the iso outputs, and secondly you're going to be paying a lot more for transformers than you do with dual secondaries. On the other hand, it makes phantom power management a lot easier. I...

Question regarding Phantom Power. Archived from groups: rec.audio.pro () Hello everyone, I hope someone out there can answer my question, and I hope it doesn't come across as too naieve!. The question is regarding Phantom Power. At college, there is...

they wanted?" In fact, your marketting DOES specifically state 48v phantom power as is apparent from page 6 of your own 2005 Product Guide. Likewise, every retailer and M-Audio dealer's website had advertised 48v phantom power before the MT's...

virgin.net writes: > Sorry, just found the answer to my own question - dynamics are fine with >phantom power, ribbons will get damaged. That's the steady-state answer, but there's more. Try to avoid plugging mics (of any type) in when phantom power...

use. > Most condenser mics require phantom power.Does a mic preamp supply >phantom power? Many condenser mics require phantom power, and most decent ones do. Phantom usually comes from the preamp (or the built-in preamp on the mixer channel),...

that requires phantom power from the board. I > also want to use a direct box for a split back to my stage amp. It sounds like you want to split a phantom powered mic to two destinations - the console (which provides the phantom power) and another amplifier...

with phantom power(Mackie and Behringer make good quality mixers which have phantom powered preamps and EQ built in for a great price). Archived from groups: rec.audio.pro () > You will need phantom power for condenser microphones. Yours is a > dynamic...