with phantom power(Mackie and Behringer make good quality mixers which have phantom powered preamps and EQ built in for a great price). Archived from groups: rec.audio.pro () > You will need phantom power for condenser microphones. Yours is a > dynamic...

transmitters which actually provide phantom power? --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." Archived from groups: rec.audio.pro () > Have you considered the Sennheiser butt plug transmitters which > actually provide phantom power?...

mixer provided 12V for phantom power, so they make the SM81 mic (roughly contemporary) so that it would work on 12V. The Mackie PPM series of powered mixers provide 15V for phantom power (it's just tapped off the IC power supply positive rail). Read the...

multimix board. As of now, phantom>power has to be supplied via 5 9V batteries in series... ick. >> So would any old 48V DC power supply suit my needs for dedicated phantom>power? Does anyone out there use this mixer and have a phantom power> supply...

from its own batter > or phantom power (I guess meaning a preamp). No phantom power does not mean a preamp. Phantom power is a method of powering microphones so that you don't have to use batteries, etc. Many preamps provide phantom power, but it...

I still had the phantom power on (MXL was unplugged at this point), and ever since, the phantom power doesn't seem to work (although the LED is on) Have I broken my mixers phantom power by plugging in another dynamic mic while the phantom power was...

Would phantom power do anything to an SM57 or Beta 52?. Archived from groups: rec.audio.pro () Assuming i only turn the pp on after the mics are plugged in..? i've read that turning on pp to an unpowered mic can damage it and i've read that it does nothing,...

that requires phantom power from the board. I > also want to use a direct box for a split back to my stage amp. It sounds like you want to split a phantom powered mic to two destinations - the console (which provides the phantom power) and another amplifier...

computer's existing power taps to build a phantom power source for use with a Delta 1010LT's mic inputs? My delta card has two mic preamps but no phantom power source, and though it's not crucial, I'd like to have phantom power available to them if need...

use. > Most condenser mics require phantom power.Does a mic preamp supply >phantom power? Many condenser mics require phantom power, and most decent ones do. Phantom usually comes from the preamp (or the built-in preamp on the mixer channel),...