connectors on the harness coming from your PSU. Does the connector you have look something like this? Left head is a 6 pin while the right head is a 3 pin like the one in the link. Notice...

I was going to just throw it away but then somebody told me I could disable a couple of pins on the chip and force a higher FSB from the chip ? I've got experience with normal overclocking but I've never tried messing around with pins like this.....There...

a large number are various power supply pins many of these are duplicated in order to spread the load, or for convenience in layout of the package. Like pins are joined electrically internally. This means you can probably get away with disconnecting some with...

motherboard last night when i opened my laptop...the soldering was pretty bad, not only for the power pins, but also for other connectors on the board. Anyway, I had time only to fix up the middle power pin (which looked like it lost its solder). Anyway,...

a fully interactive command line, & support for 640K of RAM! It is possible to straighten the pins with flat-nosed pliers and eyeballing down the matrix of the pins to make sure they are all in allignment like a good marching band. You must bend the pins back...

I'm just thinkin if the card is going to take up like 580W and the processor another 60W, that's already 640W, and I was originally planning on getting a corsair 620HX modular.. but now it looks like the 750W corsair (non-modular) is my best bet, unless someone...

Archived from groups: microsoft.public.pocketpc () Alan, if it is a cable from PC-Mobile designed to hook to an eTrex serial cable, the PA6GS which has a male 9 pin connector that fits into the eTrex serial cable (which has a female connector) then you do...

of the xD, which is becomming more popular. >> Isn't the XD proprietary, like the Memory Stick? In that case, no, it shouldn't. We have had cards in and out lord knows how many times, and never bent a pin. I'm not sure how others do it, it may...

I put an incompatible processor in a motherboard, can I damage the chip and/or the motherboard? 3. How extensive a test do I need to perform? If a processor posts or boots, how likely is it that it will have some subtle defect that will take more...