break in. Archived from groups: alt.internet.wireless () i have the linksys wireless g router. I have a web server running , and another computer, both of these are hard-wired to the router. All port forwarding goes to the webserver. Is the other computer...

about 'port forwarding' but I can't find that setting in this router either. Thanks for any help. Archived from groups: microsoft.public.windowsxp.work_remotely () As far as port forwarding goes, it looks as if you can set that up on the Virtual Server...

I won't be that twisted, I'll just start with the geek flirting that seemed to have us both rather aroused You're heading for another lashing with the CAT of 5 tails.. Ohhh baby, be my Greasemonkey ** Probes for active ports ** *sets up port forwarding* ** Goes...

Port forwarding comes and goes. I've set up port forwarding with uTorrent, but the network condition indicator keeps changing. When I checked the port forwarding, my ip address comes up as: Checking port 48022 on 203.31.103.64..... But when I access the router(...

DI-624 Advanced Port Forwarding. Hi, I have the DI-624 and I'm wondering about really advanced configuration of firewall / port forwarding. Currently I forward port 80 to computer A, so all my web traffic goes there. So I would have and on port 80 forwarding...

having to install a separate tunnel software explicitely. You don't usually. It uses some term such as "Port mapping", "address mapping" "port triggering", "Port forwarding", "service definitions". etc. > Are the requirements to high or are there...

with the wrong forwarding is you created a loop. A packet comes into the modem, gets forwarded to the router, the router forwards that packet to 81.82.xxxxxx which just sends it back to the modem. It goes nowhere in the end. Change all your port forwards...

I don´t configure the port forwarding for the passive >ports range, the port number in the answer received by >the client it´s ok (but in this case client can´t access >FTP server because de passive ports are not forwarded). >If I configure the port...

is 100 – 149). After setting the port forwarding if I type in the web browser it goes to the simpleshare drive – not to the Linksys any longer. I assume this is correct since I’m forwarding all port 80 traffic to the simple share. I then fire up...

for my office computer? Or would I use the Range Forwarding Feature on the Linksys Router? gnpmark -- gnpmark "Sooner Al [MVP]" wrote: > Basically you need to port forward TCP Port 3389 through the ADSL modem, the > DHCP router (whatever...