and it works fine with Apache. For persistent port forwards you need to assign a static IP to the PC, and remove it from DHCP. For persistent, only port forward is needed. >-----Original Message----- >I've set up a website on one of my computer. I...

Need help with Port Forwarding. Archived from groups: microsoft.public.broadbandnet.hardware () hey guys I just got the Microsoft Wireless Base Station MN-700. I installed it smoothly and everything works fine. However I tried to do some Port forwarding...

Security, then click on Port Forwarding then click on the Set up persistent port forwarding. Then type in the following: Put a checkmark box on the enable checkmark box then Description: Web Server or (whatever else you want to name it) Inbound port:...

works great on both PCs. However, I'd like to set up a web server on the PC at 192.168.1.101:80, so where and how do I set up port forwarding? I see the port forwarding, but I don't know how to make the jumps or if something special needs to be there. I...

You're trying to forward a port on your router to point to a web server? You would need to log into your router (I assume we're talking about a router) and go to the Port Forwarding section. At this point you enter the port or port range that you want to...

with setting up persistent port forwarding with Kazaa Lite? I used to get very fast downloads before I installed the router. I'm not very familiar with port forwarding, so I need a sort of step by step for setting this up. Ed Chait. Archived from...

Port forwarding does not work!. For the last few days I've been trying to configure my network so I can play some game online. In order to be able to do that it seems I need to open some ports: 2300-2400, 4001 and some other 40.xxx. My network looks like...

setup a rule. i am using the WAN IP because i need some one remotely to ssh my local machines , so port forwarding is needed . the LAN ssh is working ,even the remote ssh for the machines having real IPs is working , because there is no need to port forwarding...

support > UPnP, but you may require a firmware update or need to turn UPnP in the > configuration Hi Jonathon, Been through all that - I emailed Netcomm and asked about the UPnP and Messenger and the answer I got back was Port Forwarding needs to...

the Linksys router a static IP within the network. > Step 4 Institute the port forwarding on the linksys router for both ports> 80 and 3389 to the assigned static IP address > Step 5 Open any software firewall ports to both port 80 and 3389 > Step 6...