GA-P35-DS3R with a q9400 no post, no video, no beeps. hi I just had a q6600 with a ga-p35-ds3r working ok, but as soon as I put a q9400 in the same machine I got no post, no beep, no video, fans do spin. Gigabyte site says last bious update support q9400...

No: boot, POST, beeps, video. I've had my current computer build for about 6 months now and it had always operated perfectly. A couple of weeks ago, my computer began to power off spontaneously; no BSOD, no errors and no beeps. The system would merely shut...

myself I turn on the computer and fans start spinning wich means their power but no motherboard beeps and no video signal to my monitor. I'm thinking maybe video card issue? So i go to Fred Meyer and buy a video card and still the same problem. My rommate who...

power button/led/speaker connected to mobo with no memory results in mobo led coming on and a series of beeps (for no memory), but when I add memory there is no single POST beep, no video from onboard video (mobo led still on). My question is about diagnostics...

it on a dry towel, and connected only the 2 power connectors to the board, monitor to the on-board video connector, and one stick of RAM (tried both sticks, one at a time). Attempted to power up to see if I'd get the POST beep - it should POST and show me the...

no post on the monitor... Have RMA's the board and the Power Supply - tried the processor in another board and it posts fine.... Have pulled everything possible out of the board and still get the string of beeps and no video.. Have put in another video...

does not start (although it moves slightly when powering the machine on/off), all phase leds (which supposedly indicate CPU load) in mobo remain on, and system does not POST. There are no beeps or video. All case fans and graphics card fan start normally when...

TWIN2X2048-6400C4 2GB Kit DDR2-800 XMS2-6400 Silverstone Zeus 750 Watt PSU On power on the system does not boot Fans power up No POST beep No video LEDs on CDROM and HD cycle every couple of seconds I tried dropping down to 1 video card still...

video card if applicable. If you cant get into BIOS then you know it is either the PSU, the RAM, the CPU, the mobo itself or the video card. Change out each of these until you get into BIOS. I would start at the PSU as it is usually the guilty party in...

the CMOS, and now the dang thing won't post. No beep, no video. I think it's gonna have to go back to Newegg. I'll probably upgrade to a better board. :( wont post after reset? Did you remove the power plug from back of psu for like 10 seconds then put...