FS Power Amp Parts Crown, Dyna, Mackie, Phase, Cerwin, QSC. Archived from groups: rec.audio.pro () FS Power Amp Parts Crown, Dyna, Mackie, Phase, Cerwin, QSC We are parting out the following amps need anything? Altec 1590, 1590C Cerwin Vega A1800 Crown...

FS Power Amp Parts Crown, Dyna, Mackie, Phase, Cerwin, QSC. Archived from groups: rec.audio.tech () FS Power Amp Parts Crown, Dyna, Mackie, Phase, Cerwin, QSC We are parting out the following amps need anything? Altec 1590, 1590C Cerwin Vega A1800...

My application is primarily acoustic and classical recording/mixing; I'm not after a particular "sound". I will be adding power decoupling at each chip and will be watching for oscillation, and am buying new linear power supplies. I will be upping the...

6201 Biamp MixPak6Plus Front pannel only Test Equipment Allen Dumont Labs 241 Oscilloscope Allen Dumont Labs 250-AH Oscilloscope Power Amps Cerwin Vega A1800 Crown D150A EV 7600 QSC A32 Sunn SA10 Mackie...

6201 Biamp MixPak6Plus Front pannel only Test Equipment Allen Dumont Labs 241 Oscilloscope Allen Dumont Labs 250-AH Oscilloscope Power Amps Cerwin Vega A1800 Crown D150A EV 7600 QSC A32 Sunn SA10 Mackie...

the same or higher quality/power to satisfy myself and an indoor crowd of about 600 people, while not above $5k budget. Thanks to all Ameen PS: I would really like to know where these brands (Behringer, Turbosound, JBL, Gemini, Cerwin, Mackie, Peavey,...

myself and an indoor crowd of about 600 people, while not above $4k budget. Thanks to all Ameen PS: I would really like to know where these brands (Behringer, Turbosound, JBL, Gemini, Cerwin, Mackie, Peavey, Phonic, EAW, Bose) stand in terms of...

going through a number of them the LF roll off is still below 20 Hz. (Though if stuck using these, perhaps I should bump them up to 100 uf for better LF?) What I don't quite get, though, are the 2.2 uf/50V parts on the fader returns and outputs of most...