Prime95 error codes. Ok so I am overclocking my e7300. I have it at 3.4ghz with voltage at 1.272v. I run prime95 and it runs for like 2 hours and then stopped only on one core and gave me this error message. FATAL ERROR: Final result was 16295BCF, expected:...

to move a jumper to reset them. The basic formula you need to know for CPU speed is: [code]CPU Speed = CPUM x FSB where CPUM is the CPU Multiplier, and FSB is the front side bus.[/code] Example: The Q6600 runs at a factory setting of 2.40 GHz. That's...

cause. One thing you'll want to do is go into your preferences and uncheck the 'Automatically Restart' box when there's errors. Then the Blue screen will sit long enough for you to write down the actual error code. It got at least an hour in so...